User's Manual

Installing Option Cards
Follow these steps to install an option card:
1.
If you are installing an option card that controls a mouse, you
need to change the setting of jumper JP7 before you install
the card. If you install a display adapter card, you may
need to change the settings of jumpers JP4 and JP6. If this is
the case, see page 6-4 for instructions.
2.
Remove the retaining screw from the top of the metal option
slot cover; hold on to the screw so it doesn’t fall into the
computer. Lift out the slot cover.
?
Keep the screw to secure the option card to the computer. Store
the slot cover in a safe place in case you remove the option
card later.
6-10
Installing and Removing Options