Product Information Guide

EQUITY 386SX
lnstallation at 16MHz. If this doea not work
properly, STY switching to 8MHz for the
lnstallation. tf you am still unable to load the
program at 16MHz, try loading at 8MHz and
then switching to 16MHz.
Whenu8lngaaofhvampaokagethatuaesa
keydisk aa it oopypcotbctkn method, try
loading lt at 16MHz. fl this does not work,
enable the Auto Speed option in SETUP.
Power-on Password
Make sure that you do not forget the Power-on
Password should you set one up. If you do, it
will be wcwsary to disable it by moving
jumper 2 on the main oircuit board to the l-2
position.
If you enable network server mode after
installing a password, the oornputer prompts
you for that password before allowing you to
aorxtssthesystem-aslongasyoubootthe
system from the Reference diskette.
However, if you install MS-DOS on the hard
disk and boot from that drhfe, the prompt no
longer appears. The computer shows the
normal MSDOS prompt (e.g., C>), but it still
requires the password before allowing you to
access the sy3tam In network 8erver mode.
EQ386SX-6
9/22/89 Equity Series Computers