User's Manual

Type the following in uppercase letters and press Enter:
GEM DRIVRPK
-
4.
Insert the Utility 1 diskette and log onto drive A. Type the
following and press
Enter:
COPY \GEM3\GEMVDI.EXE B:
The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
NoteNote
This description assumes that you are using a computer
with only one diskette drive. If you have two diskette
drives, the computer copies from drive A to B without
prompting you to remove either diskette.
5.
Remove the Utility 1 diskette, insert the blank formatted
diskette, and press any key. The screen displays the message
below:
Insert diskette for drive A: and
press any key when ready
6.
Remove the formatted diskette and insert the Utility 1
diskette again. When you see the MS-DOS prompt, type
the following and press Enter:
COPY \GEM3\MDGEM8.SYS B:
The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
Using the VGA Utilities
A-21