Owner's Manual

The Lower Paper Cassette
STANDARD
Loads paper from the standard paper cassette.
OPTION
Loads paper from the optional lower paper
cassette. OPTION appears only when the lower
paper cassette is installed.
MANUAL FEED
Loads paper from the manual feed slot on the
standard paper cassette. You can hand-feed one
sheet at a time.
To change paper settings with the SelecType PAPER SIZE option,
see Chapter 3. Before you print, make sure that the PAPER SIZE
setting matches the paper size loaded in the paper cassette.
Your application program may override SelecType settings for the
lower paper cassette. If you are unable to print from your lower
paper cassette, see the following section on using software
commands.
Using software commands
There are special software considerations related to lower paper
cassette use. Also see Chapter 5 for more information on using the
printer with application programs.
Some application programs can select either cassette directly from
the program. If your application program does not support two
paper sources, you may need to insert paper cassette selection
codes into your document using a software command.
If your printer does not feed paper from the lower paper cassette
after you have specified the source number in your application
program, the program may be sending codes that cancel lower
paper cassette selection. See the setup and installation instructions
for your application package.
Appendix A A-11