User's Guide

Using Other Playback Features

You can use the DVD menu on the remote control to access several other features while listening to a CD.

Note

Most functions in the remote control’s DVD menu are used only for playing DVDs. Only the ones listed below can be used

when playing CDs.

• To repeat the current track of a CD that you’re listening to, select RPEAT from the DVD menu. To repeat

the entire CD (or a programmed playlist), press

RPEAT again. Press RPEAT a third time to cancel the

repeat function. Each time you select this option, the display changes as follows:

Repeat one → Repeat all → Repeat off

To repeat just part of a track, press

A<>B at the beginning of the part you want to repeat, then press A<>B

a second time to mark the end of the section. Press

A<>B a third time to cancel the repeat function.

• To play all the tracks on your CD in a random order, press the stop button if the CD is currently

playing. Select

SHUFF (Shuffle) from the DVD menu, then press the play button. After all the tracks

finish playing, the DVD player stops and the shuffle function is cancelled. To cancel shuffle mode while

random playback is in progress, press the stop button, then press

SHUFF.

• You can play up to 21 tracks in any desired order by creating a playlist. To create a playlist, you need to

lower the screen and turn on the projector. Also, press the stop button if the CD is currently playing.

Once the projector is turned on, select

MEMO (Memory) from the DVD menu on the remote control.

You see this screen:

Select the desired track number on the left, using the u or d button on the remote control. Then highlight

ADD, using the r button, and press SEL (Select). The track number is added to the list on the right.

Repeat for any additional tracks you want to add.

To insert a track at an earlier point in the list, highlight the track in the playlist prior to the point where

you want to insert the new track. Then select the desired track number on the left and select

INSERT. Use

DELETE to erase a track, or CLEAR to erase the whole list.

Once you’ve finished creating your playlist, highlight

PLAY and press SEL (Select) to start playback. The

playlist is retained until you remove the CD or turn off the player. To resume normal playback without the

playlist, press the stop button, then press play.

ADD

PROGRAM LISTTRACK

[15]

DELETE

PLAY

CLEAR

Select desired

track number

Playlist

Total tracks on disc