User's Manual

Chapter 6
Installing and Removing Disk Drives
The instructions in this chapter describe how to install and
remove optional Epson drives in your EISA computer. You can
use these instructions to install a variety of devices, including
diskette drives, hard disk drives, and tape drives. Even if your
drive looks a bit different from the one illustrated here, you
install it the same way.
If you are installing or removing a non-Epson drive, some of
the steps in this chapter may not apply. See the manual that
came with your drive for more information.
This chapter describes how to do the following:
U Use the correct drive bay
CI Set the IDE (Integrated Drive Electronics) hard disk drive
jumpers
tl Install or remove a drive in an upper drive bay
Ll Install or remove an internal drive.
Before you perform any of the procedures described below,
follow the steps in Chapter 4 to remove the computer’s cover
and the front panel (if necessary).
Installing and Removing Disk Drives
6-1