Owner's Manual

4.
Open the paper separator cover and tear off the paper at the
perforation.
5.
Turn off the printer.
Note:
If you open the top cover while the printer is printing, the printer
beeps four times, stops printing, and goes into pause status. To
resume printing, close the top cover and press the PAUSE button.
You can select normal draft mode or high-speed draft mode using
DIP switch 1-2. For details, see Chapter 3.
If continuous paper
is fed past the sprocket (on the last page, for
example), the paper may not feed properly.
Set Up and Print
1-19