Owner's Manual

Do not block any slots or openings in the cabinet. These are
provided for the ventilation necessary to ensure reliable
operation and protection from overheating. Placing the
printer on a bed, sofa, rug, or other similar surface may
block the openings. Also, do not place the printer in a
built-in installation unless proper ventilation is provided.
Never place the printer near or over a radiator or heat
register.
Use the type of power source indicated on the label. If you
are not sure of the type of power available, consult your
dealer or local power company.
This printer may be equipped with a plug having a third
(grounding) pin, which fits only into a grounding-type
outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, have an electrician replace your
obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
Do not put your printer where the cord wiIl be walked on.
If you use an extension cord, make sure that the total of the
ampere ratings on the products plugged into the extension
cord does not exceed the extension cord’s ampere rating.
Also, make sure that the total of all products plugged into
the wall outlet does not exceed 15 amperes.
Never push objects of any kind into your printer because
they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock.
Except as specifically explained in the user’s manual, do
not attempt to repair the printer yourself. This could
expose you to dangerous voltage points or other risks.
Refer all servicing in those compartments to service
personnel.
Getting Started 7