Owner's Manual

6
Using the Control Panel
The touch panel displays only the buttons that are available for the project you are
working on.
Whenever you see the
l
and
r
buttons, you can press them to view more
photos or access more options.
Whenever you see the x
Menu
button, you can press it to make special
settings.
Whenever you see the
Home
button, you can press it to return to the main
menu.
The touch panel retains the settings from the last time it was used. If you want
to start over, simply press
Clear Settings
.
To save energy, the touch panel goes dark after 13 minutes of inactivity. Touch
the screen to wake it up.
The blue status light at the bottom of the panel flashes when the Artisan 800
Series is printing or performing routine maintenance.
Note:
If the blue status light flashes rapidly, check the Artisan 800 Series for error
messages.
You may see the following icons on the screen:
Icon Meaning
The Artisan 800 Series is connected to a wired network
The Artisan 800 Series is connected to a wireless network
ADF A document is loaded in the automatic document feeder
The current photo is cropped
The Fix Red-Eye setting is on for the current photo or all photos