Owner's Manual

Printing From a Camera 33
Printing From a Camera
If you have a digital camera that supports PictBridge
™
printing, you can connect it
to the Artisan 800 Series and print your photos directly from the camera. Check
your camera manual to see if it is compatible.
Your photos must be in JPEG format and sized from 80 × 80 to 9200 × 9200
pixels.
Note:
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper
type, size, and layout may not be supported, depending on your camera and the Artisan
800 Series settings.
1. Remove any inserted memory card from the Artisan 800 Series.
2. Connect the USB cable that came with your camera to the USB
connector on the front of your Artisan 800 Series.
3. Turn on your camera. You see a connection message on the Artisan 800 Series
display screen.
4. Load Epson photo paper (see page 7).
5. Press the
Home button, if necessary, and select Setup .
6. Press
l or r and select PictBridge Setup . You see this screen: