User's Manual

To leave SETUP, press ESC from any SETUP screen. From the
SETUP Main Menu, you can perform the following functions in
the table below.
Exiting SETUP options
Option
Load ROM Default
Values
Description
Loads the factory default settings stored in ROM
back into CMOS: if you change your configuration
using SETUP and then have problems, you can
load ROM values to boot the system and start over
Load Values from
CMOS
Loads the current values stored in CMOS for all
SETUP options: ignores any changes you have
made through SETUP
Save Values to Saves the changes you have made to your
CMOS configuration to CMOS
Press ESC to exit SETUP without saving your settings and
restart your computer.
All the files and drivers you need for maximum performance
with the operating system on your computer are already
installed. If you switch to another operating system, such as
NetWare,
®
you may want to install PCI IDE drivers, which let
you take full advantage of the high-speed performance
available through your system’s IDE interfaces for hard disk
drives and other IDE devices.
2-20 Running SETUP and Installing Drivers