User's Manual

3. Type the same password a second time and press Enter. You
see a message that your change has been saved.
4. Press the spacebar. The Supervisor Password option
now displays Enabled.
To set a User password, select the Set User Password
option as you follow the steps above.
Deleting passwords
To delete your passwords, follow these steps:
1. Set the Password on boot option to Disabled.
2. Delete the User password by pressing Enter for both the
password field and the confirmation field. Don’t type any
characters in these fields.
3. Then delete the Supervisor password the same way.
If you forget your password, see “Password Problems” in
Chapter 7.
Using the virus protection features
The Diskette access option lets you restrict access to
your diskette drives based on the password levels you have
defined. This prevents unauthorized users from accessing the
drives and possibly introducing a virus to your system. You
can restrict diskette access only if passwords are enabled and
you have enabled the Password on boot option.
Running SETUP and Installing Drivers 2-15