User's Manual

Changing the Password

you enable the Password Checking Opt ion on

the ADVANCED CMOS SETUP screen, you use the

CHANGE

PASSWORD option to specify the password.

Caution

If you do set a password, be sure it is easy to remember. If

you forget your password, you will have to call the Epson

Connection for assistance.

When you select the

CHANGE

PASSWORD

option, you see the

following prompt:

Enter CURRENT

Password :

Type the current password. (When you enable a password for

the first time, the current password is AMI.) You see the

following prompt:

Enter NEW Password :

Type your password using up to six characters. To protect your

password, the screen does not display what you type. After

typing the password, press

. Then you see the following

prompt:

Re-Enter NEW Password :

Type the same password again and press

. (This confirms

your password for the system.) The program displays the

following message:

NEW Password Installed

Press

to return to the main menu screen. Highlight

WRITE TO CMOS AND EXIT and press

5-12 Running Setup