Owner's Manual

Error Messages

TONER EMPTY

The developer unit may not be installed properly. Open the printer

and make sure the developer unit is seated properly in the basket.

If the message remains, the toner is low and you must replace the

toner cartridge. See the section on replacing the toner cartridge in

Chapter 6.

CPU ERROR

ERROR 30

ERROR 10

ERROR 31

ERROR 11

ERROR 32

ERROR 12

ERROR 33

If one of these error messages appears, follow the steps below.

1. Press the

CONTINUE/RESET

button.

If the error does not clear, turn the printer off for at least five

seconds. Then turn it back on.

If the problem remains, service is required. Call 1-800-922-8911

for the location of the nearest Epson Customer Care Center.

7-6

Troubleshooting