User`s guide

a
• When AutoRun is set for a scenario, it is automatically played back
with the highest priority over other input sources. If you want to
stop it from playing back, press the [Esc] button on the remote
control.
• You can also insert a memory card into a USB card reader and then
connect the reader to the projector. However, some commercially
available USB card readers may not be compatible with the
projector.
• If the following screen (Select Drive screen) is displayed, press the
[
], [ ], [ ], and [ ] buttons to select the drive
you want to use, and then press the [Enter] button.
• To display the Select Drive screen, position the cursor on Select
Drive at the top of the file list screen, and then press the [Enter]
button.
Projecting images
a
Use the [ ], [ ], [ ], and [ ] buttons to select the
file or folder you want to project.
a
If not all of the files and folders are displayed on the current
screen, press the [Down] button on the remote control, or
position the cursor on Next Page at the bottom of the screen
and press the [Enter] button.
To return to the previous screen, press the [Up] button on the
remote control, or position the cursor on Previous Page at the
top of the screen and press the [Enter] button.
b
Press the [Enter] button.
The selected image is displayed.
When a folder is selected, the files in the selected folder are
displayed. To return to the previous screen, position the cursor on
Back to Top and press the [Enter] button.
Rotating images
You can rotate the played images in 90˚ increments. The rotating function
is also available during Slideshow.
a
Play images, or run Slideshow.
Projection Functions
47
Downloaded From projector-manual.com Epson Manuals