User`s manual

- 34 -

F Other Connectors

ATX Power Supply Connectors (ATX1 and ATX2)

This motherboard uses 20-pin (ATX1) Pentium 4 standard ATX power header

and ATX2 with 1X4-pin +12V PC ATX power supply headers.

Please make sure you plug in the right direction.

Note 1: The ATX power connector is directional and will not go in unless the

guides match perfectly making sure that pin#1 is properly positioned.

Note 2: Make sure the latch of the ATX power connector clicks into place to

ensure a solid attachment.

Note 3: Your ATX power supply must be supplied to ACPI +5V standby power

and at least 720mA compatible.

Note 4: Make sure your power supply have enough power for higher speed

processor installed.

P4 ATX Power supply headers

ATX1 ATX2

ATX1

ATX2

ATX12V

ATXPWR