Installation Guide

- 2 -
Prohibit
Do not continue to use the product when
it breaks down
When the following occurs, please unplug
the power plug, close the inlet Angle valve,
stop the inlet.
- If continued under the condition of failure,
it may cause fire, electric shock or indoor
seepage problems
Do not disassemble, repair or transform
the product without permission
- It may cause a fire or electric shock
Do not use extension wires. otherwise,
it may cause a fire or electric shock
- Do not connect wires or use extension
cords, which may cause fire and electric
shock.
Do not install this product in damp places
such as bathrooms
- It may cause a fire or electric shock
Do not use unhealthy water
- May cause skin irritation and other
problems
Do not damage the power cord or toilet
seat cable
- Don’t pull
- Don’t process
- Don’t heat
- Don’t forcibly bent
- Do not place heavy objects on the power
cord and toilet seat connection line.
- May cause fire, electric shock or short
circuit. If the power supply is damaged,
please contact a professional for repair.
- Ceramic WC is leaking
- Cracks appear
- Abnormal sound and smell
- Fume-off
- Abnormal heating
- The toilet is clogged
The first use of
Intelligent toilet
Note: To ensure the normal use of the product,
please follow the instructions to text.
1.Insert the power plug into the AC (AC) 110V socket
2.Please confirm whether the indicator of the digital
display panel is lit
3.Confirm whether the inlet valve is take on
4.Whether the hose between the wall Angle valve and
the toilet inlet valve is installed in place
Power plug
With ground wire
110V socket
Angle valve
Water inlet
hose
Check the functions of cleaning, drying and automatic deodorization,
make sure the sensor is on.When cleaning, cover and block the spray nozzle, so as not to splash.
Caution-Confirmed matters before using
1.Check whether the sprinkler head and water pipe leak, dry all parts
of the water pipe and check with blotting paper.
2.Press the seat around the seat sensor, whether there is a sound.
3.Check whether the cleaning, drying, automatic deodorization and
automatic flushing are normal
4.Whether the Damped structure is normal.
1. Radar switches to foot cover: press the cover button on the remote control for 5 seconds,
2. Turn off | turn on disseat water flushing: press the automatic water flushing button on the remote control
for 5 seconds
3. Turn off | turn on the function of flushing upon cover falling: press the cover and flushing buttons on the
remote control at the same time
Seating sensing position
Warning - Be sure to firmly connect ground wires
The power plug of this product is a three-phase plug (with ground wire).
There is a danger of electric shock when there is a fault or leakage of electricity.
If there is no ground plug in the socket, consult with the electrical installation company.
Do not use power supply other than AC 110V, please wiring according to relevant regulations.
*Using the wrong power supply can easily cause fire*