User Manual

Table Of Contents
SDW 5000 series headset system
USING THE MOTION SENSOR45
Using the motion sensor
The headset is equipped with a motion sensor that registers when the headset is put in or out of rest position.
Enabling/disabling the motion sensor
“Motion sensor on
“Motion sensor off“
Put on the headset and place the ear cup on the left
ear.
Press the volume button as shown and simultaneously
the hook button. Hold the buttons until you hear three
beeps.
The motion sensor is enabled/disabled and you can
choose your wearing side. The voice prompt “Motion
sensor on” or “Motion sensor off” is announced.
You can also change this setting via
HeadSetup™ Pro.
Using the motion sensor
Lift the headset from the desk and put it on.
The sensor registers motion and the incoming call is
accepted.
SDW 30 HS | SDW 60 HS:
Music will be paused when you lay down the headset and
resumed when you put on the headset again.