Instruction Manual Ultra Light Series • 502 Amplifier • 902 Amplifier • Quest II Preamp • UL 112 Combo • UL 210 Combo • UL 115 Combo
• Table of Contents Introduction .................................................... 2 INNOVATE • EVOLVE • INSPIRE Ultra Light Series Important Safety Information.......................... 3 Front Panel Features ....................................... 4 Rear Panel Features ........................................ 5 Getting Started................................................ 6 Connections .................................................... 6 Powering Up ...............................................
• Epifani Ultra Light Series Since 1992 the Epifani design team has been working very closely with many of the world’s leading bassists, developing what are regarded as some of today’s finest and most rewarding bass amplification systems. We are dedicated to research and development, constantly evolving innovating, and hopefully, inspiring in the process. All Epifani products are designed to meet the needs of the working & traveling musician. Portability, tone, weight, and size do matter.
• WARNING/CAUTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO A QUALIFIED PROFESSIONAL.
• Front Panel Features 1.) Passive Input – Input jack for a passive instrument. 2.) LED Channel Indicator & Peak Indicator – Indicates channel switching and gain limits. 3.) Channel 1 Gain – Adjusts the input signal to the appropriate level. 4.) Channel 1 Bass Control – Adjust the amount of low frequency 5.) Channel 1 Mid- Midrange Control – Adjusts the amount of midrange frequencies 6.) Channel 1 Treble Control – Adjusts the amount of high frequencies 7.
• Rear Panel Features *Balanced Out- (Quest II preamp only) - This XLR jack is a low noise output intended for use with an amplifier that has a balanced input. 19.) USA/European Power Select Switch – Select 120V for use in the U.S. Select 220V for European use. 20.) AC Line-in – Firmly plug the supplied AC power cable into the socket. 20b.) Fuse – The fuse protects the amplifier from damage due to line current faults, power surges etc... If the fuse blows replace it with the appropriate fuse.
• Getting Started Now that you’ve become acquainted with the features of your new Epifani Amplifier it’s time to actually experience the product. To operate this product to it’s fullest potential please read these instructions thoroughly. WARNING! - BEFORE PLUGGING YOUR UNIT IN FOR THE FIRST TIME READ THE FOLLOWING SECTION CAREFULLY. AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the apparatus (e.g.
• Dialing in Your Sound Now you’re ready to utilize the studio quality EQ sections to really refine your sound. In general it is always better to cut or subtract EQ than to add EQ. When you cut unwanted frequencies you’ll decrease the overall volume of the system so, to compensate, you can simply turn up the gain to compensate. The EQ section of the Ultra Light Series 502, 902, and Quest II Preamp is null at the 12 O’clock position.
playing (via the channel button or the optional footswitch). * This is particularly useful when using two instruments (in a live situation) that require different Gain sensitivity, or require different EQ settings. For example: an upright bass and an electric bass, or a fretted and fretless bass etc.
• Specifications UL 502 Power Rating: 600w @ 4 ohms Weight: 16 lbs. Dimensions: 13” W x 11” D x 3” H (2 RU) Inputs: 1 Active, 1 Passive Signal to Noise Ratio: 90 dB Output Impedance: 4 ohms Input Impedance: Passive 470 Kohms, Active 200 Kohms UL 902 Power Rating: 750w @ 4 ohms Weight: 18 lbs. Dimensions: 19” W x 11” D x 3” H (2 RU) Inputs: 1 Active, 1 Passive Signal to Noise Ratio: 90 dB Output Impedance: 4 ohms Input Impedance: Passive 470 Kohms, Active 200 Kohms Quest 2 Pre-Amp Weight: 8 lbs.
• Speakers and Accessories Your newly purchased head was designed specifically for our innovative cabinets. If you don’t already own an Epifani speaker you may want to consider these options: UL 110 Speaker: 1 x 250w RMS Cast Aluminum Frame •100w RMS Tweeter • Freq. Response: 45Hz - 16kHz • Power Rating: 250w RMS (600w Peak) • 8 Ohms • Suggested Wattage: 100w - 500w • Sensitivity: 99dB SPL @ 1w 1m • Recessed Handles • 22 lbs. UL 112 Speaker: 1 x 300w RMS Cast Aluminum Frame • 100w RMS Tweeter • Freq.
• The Epifani Family Alphonso Johnson Joseph Sanchez Dave Beasley Anthony Jackson Kevin Jacoby (Cecilia) Joel Cataldo Antonio Righetti Lincoln Goines Brett Zadio Carlito Del Puerto Matthew Garrison Al Improta Carlos Del Puerto Mike Bendy Dominique DiPiazza Christian McBride Mike Pope Mark Dresser Dan Lakin (Lakland Basses) Oscar Cartaya (Spyro Gyra) Jon Bristol Daniel Vinec Oscar Stagnaro (Paquito De Rivera) Gary MacKenzie Darryl Jones (The Rolling Stones) Pepe Fabregues (Fabreques Basses) Anthony Wellingt
