User's Manual

Conguring Advanced Settings

AllowsyoutodenetheAdvancedSettingsavailableontherouter.

ToviewtheAdvancedsettings,clickWireless then select Advanced.

Fragment Threshold

Enterthemaximumsizeofapacketduringdatatransmission.

Avaluetoolowcouldleadtolowperformance.

RTS Threshold

EntertheRTSthreshold.Ifthepacketsizeissmallerthanthe

RTSthreshold,therouterdoesnotuseRTS/CTStosendthe

data packet.

Beacon Interval

Enterthebeaconinterval.Thisistheamountoftimethatthe

routersetstosynchronizethenetwork.

Delivery Trafc Indication Message (DTIM) Period

EntertheDTIMperiod.TheDTIMisacountdownperiodinformingclientsofthenextpoint

ofbroadcastandmulticastofmessagesoverthenetwork.Validvaluesarebetween1and255.

N Data Rate

SelecttheNdatarate.ThisistherateinwhichtheESRSeriesRouterwilltransmitdatapacketstowirelessNcompatibledevices.

WARNING!Incorrectlychangingthesesettingsmaycausethedevicetostopfunctioning.Donotmodify

thesettingsinthissectionwithoutathoroughunderstandingoftheparameters.