User manual

26
7.14. MESSAGES
There are some messages to inform user the current status of the D2800.
≥ No Signal
If D2800 can’t get the signal, for example if the antenna cable is disconnected.
≥ No Service
Program doesn’t have any contents to play.
≥ Encoded Service
Program is encoded for payment, you need to contact with the content provider to know how to
decode it.
≥ Antenna Overload
The power of antenna is overloaded.
≥ HDTV Not Support
If the program content is HDTV format, D2800 doesn’t support it.
≥ Channel Locked
Program is locked by setting lock (see section “Lock” on page 15) and turning on channel lock in
password setting (see section “Channel Lock” on page 14). You must input the correct password to
watch the channel. See Figure 37.
Figure 37. Password-locked channel