Brochure

MULTI-STAGE - MULTI-SOURCE - MPPT BATTERY CHARGER
Designed to meet the rugged demands of
Australian conditions and delivering multiple
source charging for DC systems.
The Enerdrive ePOWER DC2DC+ Battery Charger
is a fully automatic multistage, multi input
battery charger with the ability to charge from
either an alternator linked to a battery; or via
solar power with the in built Maximum Power
Point Tracking (MPPT) Solar Controller.
Two totally independent DC Inputs for both
engine and solar regulation charging one
house battery bank output
DC M6 screw terminals that will allow for large
battery cable connection between all sources
A dedicated Maximum Power Point (MPPT)
solar regulator
The same battery algorithms as included in our
AC mains ePOWER battery charger. GEL, AGM,
Flooded, Lithium and the ability to create a
full custom prole
Vehicle input allows for either 12 or 24v and a
maximum solar input of 45V/800W
40A output up to 40+°C with thermo controlled
fan cooling
Fully programmable LCD display to show
which source is charging the battery along
with charger status, voltage and amperage
Temperature sensor included in charger for
more accurate battery charging
P.O. Box 9159 Wynnum Plaza Queensland 4178
Ph: 1300 851 535 / Fax: [phone]
Email: [e-mail]
Web: www.enerdrive.com.au