Manual

4. INSTALLING THE CHARGER
WARNING
Enerdrive recommends that all wiring be done by a skilled technician to
ensure adherence to the best practice standards for on-board DC electrical
installations. Failure to follow these instructions can damage the unit and
could also result in personal injury or loss of life.
CAUTION
Before Beginning Your Unit Installation, Please Consider The Following:
The unit should be used or stored in an indoor area away from direct
sunlight, heat, moisture or conductive contaminants. This is an electronic
device cooled by a fan, and will prematurely fail if installed in corrosive
environments.
When placing the unit, allow a minimum of 75mm of space around the unit
for optimal ventilation.
NOTE
The Enerdrive ePOWER Battery Charger is designed to be permanently mounted.
Mounting The Charger
• Choose an appropriate mounting location.
• For installing in an indoor location, the unit can be mounted in any
direction although mounting the charger vertically provides the
best thermal performance
• For installing in boat or marine environment, the unit can be
Page 15www.enerdrive.com.au