Assembly Instructions

ManualsBrandsEnchanted Forest ManualsChristmas7.5' Prelit LED Flocked Aspen Artificial Christmas Tree

SAVE THESE INSTRUCTIONS

769839-132 Page 1 of 6

7.5’ Lighted Flocked Aspen

350 Warm White or Multi Colored LED Lights

Item #: 769839-132

CARTON CONTENTS

Part

Item Description

Quantity

Top Section of tree

Middle Section of tree

Bottom Section of tree

Stand for the tree

Eye Bolts

Spare Bulbs

NOTE - Retain carton for storage purposes

CUSTOMER SERVICE

Prior to assembly, please make sure all carton contents are present. Do not attempt to assemble the tree if any parts are

missing or damaged. Please contact Seasonal Specialties customer service department if you need any assistance or

replacement parts: 1-800-353-3116, 9:00 a.m. – 5:00 p.m. CST, Monday – Friday or visit our website at

http://www.seasonalspecialties.com

Summary of content (6 pages)

PAGE 1
7.5’ Lighted Flocked Aspen 350 Warm White or Multi Colored LED Lights Item #: 769839-132 CARTON CONTENTS Part Item Description Quantity A Top Section of tree B Middle Section of tree C Bottom Section of tree D Stand for the tree E Eye Bolts F Spare Bulbs NOTE - Retain carton for storage purposes 1 1 1 1 3 6 CUSTOMER SERVICE Prior to assembly, please make sure all carton contents are present. Do not attempt to assemble the tree if any parts are missing or damaged.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS WARNING – Risk of Fire, Personal Injury and Electrical Shock: 1. Read all instructions and warnings included with this tree. 2. Risk of personal injury and electric shock: Watch for any bulbs that may have broken during shipping, or during storage each year, by following the bulb replacement instructions before assembling or plugging in. 3. Do not leave product unattended while plugged in. 4. For Indoor Use Only. 5.
PAGE 3
ASSEMBLY INSTRUCTIONS WARNING: Risk of personal injury and electric shock a. Watch for and replace any bulbs that may have broken during shipping and storage each year by following the bulb replacement instructions before assembling or plugging in. 1. Carefully remove all pieces from the box and lay out parts flat on the floor. Carefully remove all pro tective wrapping from the parts. Before beginning tree assembly please make sure all carton contents are present.
PAGE 4
SHAPING INSTRUCTIONS STEP 1 Begin to shape the branches by always working from the bottom section of the tree to the top (1a). When working each section, start with the tips closest to the tree’s center pole (1b). Fan out branch tips, one to the left, one to the right and one at the center. Tips should be alternately placed so they do not line up one after another (1c). Branch tips should curve slightly upwards (1d). This will create a more natural looking tree profile.
PAGE 5
TROUBLESHOOTING INSTRUCTIONS With proper care, the LEDs should work for many years, however, as in all products some LEDs may go out early. This tree is supplied with spare LED bulbs just in case replacement is need, which is done quickly and easily following the trouble shooting directions below. Notes:     Unlike standard sets, it is normal to see some bulbs not working, and still have the other lights in the set still illuminating; this is one of the ways an LED bulb can go out.
PAGE 6
If ALL of the Tree Lights are Off or Not Working: 1. 2. 3. 4. Push the button on the foot pedal to turn on the lights. Make sure the foot pedal connector is securely attached to the adaptor. (See Trouble Shooting Instructions) Make sure the adaptor is plugged into a 110V-125V AC outlet. Make sure the outlet has power (check to see if any switches or timers control the outlet) and not connected to a dimmer switch. 5.