User`s manual

Download the latest firmware from our official website.
Step 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware upgrade. Copy the 5 files for upgrade to the root
directory of your USB Pen Drive.
Step 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the player.
Step 3: Hold the power / standby button
Press and hold the power / standby button on the front panel, and do not loosen.
Step 4: Connect the power cable
Plug the power cable into the DC IN jack, wait for about 3 seconds or more, and then loosen
your finger on the power / standby button;
Firmware installation will start in about 30 seconds. The LED indicators on the front panel will
be enlightened and flashing during installation. If it is connected to a TV set, a yellow install
page will appear on the TV screen.
Please wait for about 2 minutes, the installation will be completed, the LED indicators will go
off, and the player will be powered off automatically. Then you can press the power /
standby button to turn on the player and enjoy.
Note:
Do not turn off the power during installation;
The USB Pen Drive is not allowed to be unplugged during installation.
66 / 72