User's Manual

Note: Although the sensitivity increases when the maximum gain is increased, noise can

increase in dark scenes or during sensitivity boost operation.

If noise is objectionable during sensitivity boost operation, reduce the maximum gain

or set AGC to OFF.

When set to 31dB, if the scene darkens to where the gain reaches 21dB, video level

fluctuation can occur.

To avoid this fluctuation, set the AGC to 21dB.

Maximum gain of AGC can not be changed by rear panel Setup buttons.

Change maximum gain of AGC by remote control from a personal computer.

White balance menu

1)Press the Set button for longer than 2 seconds to display the MAIN MENU.

2) Position the cursor at SET and press the left (right) direction button to change CLOSE to

OPEN in order to save the setting.

3) Position the cursor to WHITE BALANCE and press the Set button to display the WHITE

BALANCE MENU.

White balance menu

Three white balance control modes can be selected according to conditions.