INSTRUCTION MANUAL GAS COOKTOP Appliance Class: 3 Empava Item #: 24 " :EMPV-24GC28 30 " :EMPV-30GC20 EMPV-30GC21 EMPV-30GC26 36" : EMPV-36GC22 EMPV-36GC23 EMPV-36GC24 EMPV-36GC25 EMPV-36GC27 Distributed by: Empava Appliances Inc. 15253 Don Julian Rd, City of Industry, CA 91745 USA www.empava.com The instructions shall be marked with directions to the installer to leave them with the appliance and to the consumer to retain them for future reference.
WARNING:This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged, it must be replaced by the manufacturer.
Contents ◆ Cooktop Description ◆ Important Information ◆ Operation ◆ Maintenance and Cleaning ◆ Troubleshooting ◆ Instructions for the Installer ◆ Important safety requirements ◆ Installation This appliance shall be installed in accordance with the regulations in force and only used in a wellventilated space. Read the instructions before installing or using this appliance.
Cooktop Description EMPV-30GC20 Operating Instructions: Knob 1 is for burner 10 Knob 2 is for burner 9 Knob 3 is for burner 8 Knob 4 is for burner 7 Figure 1 Knob 5 is for burner 6 Total heat input: 39000Btu/hr EMPV-30GC21 1.burner 6—6000Btu/hr in 2.56" 2.burner 7—10200Btu/hr in 3.74" 3.burner 8—13000Btu/hr in 4.80" 4.burner 9—6000Btu/hr in 2.56" 5.Burner 10—3800Btu/hr in 1.
EMPV-36GC23 Operating Instructions: Knob 1 is for burner 10 Knob 2 is for burner 9 Knob 3 is for burner 8 Figure 4 Knob 4 is for burner 7 Knob 5 is for burner 6 1.burner 6—10200Btu/hr in 3.74" 2.burner 7—6000Btu/hr in 2.56" 3.burner 8—13000Btu/hr in 4.80" 4.burner 9—6000Btu/hr in 2.56" in 1.77” 5..
EMPV-36GC27 Operating Instructions: Knob 1 is for burner 10 Knob 2 is for burner 9 Knob 3 is for burner 8 Knob 4 is for burner 7 Knob 5 is for burner 6 Figure 7 1.burner 6—3800Btu/hr in 1.77” 2.burner 7—6000Btu/hr in 2.56" 3.burner 8—13000Btu/hr in 4.80" 4.burner 9—6000Btu/hr in 2.56" 5.burner 10—10200Btu/hr in 3.
Important Information Read the instructions before installing or using this appliance. Children should be supervised to ensure that they do not play with the appliance. These instructions are only valid if the country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country.
When Use ➢ This gas cooktop is intended for domestic cooking only. It is not designed for commercial or industrial purposes. ➢ When in use a gas cooking appliance will produce heat and moisture in the room in which it has been installed. Ensure there is a continuous air supply, keeping air vents in good condition or installing a cooker hood with a venting hose.
◆ If the burner fails to ignite, put into off position and try again. If in case of a power failure or failure of the ignition, a match or lighting devise can be used. Care must be taken when using this method. The device shall not be operated for more than 15s. If after 15s the burner has not lit, stop operating the device and open the compartment door and/ or wait at least 1 min before attempting a further ignition of the burner.
Figure 11 Re-ignition: If the flame is out for certain reasons, the safety device will cut off the gas power automatically. Turn the switch to " largest flame " position, then ignite again, you should wait for 30 seconds when you do that; Due to the air in the tong, there may be unsmooth ignition, revolve the switch to " largest flame " position and ignite again. Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the gas cooktop from the electricity supply.
Thermocouple The thermocouple is very crucial for cutting gas supply in case of flame out during cooking, be sure to keep them in very clean condition. Leak testing of the appliance shall be conducted according to the manufacturer’s instructions. Maintenance instructions suggesting (We suggest to clean it every six months.): 1) Keeping appliance area clear and free from combustible materials, gasoline, and other flammable vapors and liquids. 2) Not obstructing the flow of combustion and ventilation air.
Cut out dimensions For Model Width Depth 28.58in 18.54in 34.68in 19.33in EMPV-36GC27 32.83in 18.66in EMPV-24GC28 22.08in 18.54in EMPV-30GC20 EMPV-30GC21 EMPV-30GC26 EMPV-36GC22 EMPV-36GC23 EMPV-36GC24 EMPV-36GC25 Technical Data Burner configuration NG LPG Nozzles Dia. (mm) Btu/hr Nozzles Dia. (mm) Btu/hr Ultra-rapid burner 1.68 13000 1.10 13000 Rapid burner 1.57 10200 0.96 10200 Semi rapid burner 1.16 6000 0.76 6000 Auxiliary burner 0.91 3800 0.
Figure 12 WARNING: The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use. Keep natural ventilation holes open or install a mechanical ventilation device.
A manual valve be installed in an accessible location in the gas line external to the appliance for the purpose of turning on or shutting off gas to the appliance. Warning：Turn the knob counterclockwise to adjust the flame, size, so that the flame does not float out of the container rim. If need to adjust the flame size from big to small when operation, turn the knob counterclockwise 90 degrees to the position.
1) Air supply valve and cooktop valve need to be closed, unplug the power plug for AC model. 2) When the gas pressure regulator is in NG state and need to be converted to Propane state, counterclockwise unscrew the end cap under the gas pressure regulator, and then counterclockwise unscrew the marked NG threaded rod, reverse the threaded rod, turn the LP arrow upwards and tighten it to the screw cap, then install the cap back to the gas pressure regulator.
WARNING This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit.
Gas Connection and check D: End of fitting with 1/2 BSP male thread(See Figure 17) Figure 17 D The cooktop valve is in the closed state, open the air supply valve, coated the connector with moderate amounts of soapy water, if there is air bubbles that it means there is leakage, tighten the connector and test again. If repeat 3 to 4 times and there is still air bubbles, notify professionals to deal with it. Cut Out dimensions The dimensions of the cut-out are given in the diagram.
WARNING Electrical Grounding Instructions This appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.
Simply fill in the fields below and print form. Send Completed Form to: Customer Service:(888)-682-8882 Empava Appliances Inc. Warranty/ Registration Dept. 15253 Don Julian Rd City of Industry,CA,91745 WARRANTY CARD PLEASE READ AGREEMENT BEFORE SIGNING Click Here Keep this copy for yourself.
