Installation Guide

respecting the distance indicated. Push the hood up against the wall
unit and insert the 4 screws operating from inside the wall unit
4. Make the electrical connection.
Installation is now complete.
Notice:
-Exhaust air must not be discharged into a flue which is used for exhausting
fumes from appliance burning gas or other fuels.
-If the instructions for installation for the gas hob specify a greater distance
than 650mm, this has to be taken into account.
-The regulations concerning the discharge of exhaust air have to be
followed.
OPERATION
The hood is operated using the rock button on the front panel.
The light switch turns the lamps on and off.
The fan switch turns the fan on to two speed settings:
fan switch
MAINTENANCE
GREASE FILTER
The grease filters should be cleaned frequently (every two months of
operation, or more frequently for heavy use). Use a warm detergent
solution.
Grease filters are washable.
LAMPS
This range hood requires two normal lamps (AC 220V, 2W Max).