Cycles Guide

C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number
20180716-E355047
Report Reference
E355047-20180713
Issue Date
2018-JULY-16
Bruce Mahrenholz,
Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at
http://ul.com/aboutul/locations/
Page 1 of 2
Issued to:
LETARON ELECTRONIC CO LTD
3RD FL, XIAOTIANTOU FACTORY
XINSI VILLAGE, HENGLI TOWN
DONGGUAN
GUANGDONG 523460 CHINA
This is to certify that
representative samples of
COMPONENT - DRIVERS FOR LIGHT-EMITTING-DIODE
ARRAYS, MODULES AND CONTROL
LERS
See addendum page for models
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
See addendum page for standards
Additional Information:
See the UL Online Certifications Directory at
www.ul.com/database
for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog
number, model number or other product designation as specified under “Marking” for the particular
Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products
that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:
, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is
required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual
recognitions.
Recognized components are incomplete in certain constructional features or restricted in performance
capabilities and are intended for use as components of complete equipment submitted for investigation rather
than for direct separate installation in the field. The final acceptance of the component is dependent upon its
installation and use in complete equipment submitted to UL LLC.
Look for the UL Certification Mark on the product.