Specification Sheet

NSF ¤
610
699
51
B
A
38
38
38
6 R
89 DIA. CSK HOLE
610
699
51
CB
A
38
38
38
6 R
89 DIA. CSK HOLE
610
699
51
C
C
B
A
38
38
38
6 R
89 DIA. CSK HOLE
610
699
51
CB
A
38
38
38
6 R
89 DIA. CSK HOLE
Model
Dimensions
Number A B C
WNSF8124LR 1829 610 610
WNSF8130LR 1981 762 610
WNSF8136LR 2134 914 610
• WCNSF8100LR
Model
Dimensions
Number A B
WNSF8124 686 610
WNSF8130 838 762
WNSF8136 991 914
• WCNSF8100
GENERAL
Model No. WNSF______ #14 gauge, type
304, (18-8) stainless steel scullery sink.
Compartments 356mm deep. Welded 6mm
radius coved corner construction. Welds
are ground to a smooth and cleanable
finish. Full length 203mm high backsplash
with 45° sloped top. 38mm wide inward
sloping top channel rims. Integral drain-
board/s, sink compartments pitched to
drain. Exposed surfaces polished to a
satin finish. Weldbilt sinks carry the NSF
International Certification.
Sinks supported on (4)
LK251 stainless
steel, 41mm O.D. tubular legs, #16 gauge
wall thickness. Adjustable bullet shaped
feet.
Shaded models are normally
carried in stock with standard
faucet location.
Non-shaded models with speci-
fied dimensions are considered
standard models which must be
made to order–standard faucet
location unless otherwise specified.
Last item in each group is custom.
Fill in dimensions. Standard faucet
location unless otherwise specified.
Drainboards over 648mm long fur-
nished with one tubular leg.
Drainboards over 1,219mm long
furnished with two tubular legs.
SPECIFIED FITTINGS:
SUPPLY:
DRAIN:
ALL DIMENSIONS IN MILLIMETERS.
SEE OTHER SIDE FOR DIMENSIONS IN INCHES.
NO DRAINBOARD
•
Model
Dimensions
Number A B C
WNSF8124R 1257 610 610
WNSF8130R 1410 762 610
WNSF8136R 1562 914 610
• WCNSF8100R
RIGHT DRAINBOARD
Model
Dimensions
Number A B C
WNSF8124L 1257 610 610
WNSF8130L 1410 762 610
WNSF8136L 1562 914 610
• WCNSF8100L
LEFT DRAINBOARD
RIGHT & LEFT DRAINBOARD
(Check Model Specified):
Weldbilt
®
Single Compartment Scullery Sink
6mm Radius Coved Corner
®
SPECIFICATIONS
Elkay
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2006 Elkay
4-5H (Rev. 6/06)
INDICATE NUMBER OF FAUCET HOLES WHEN
PLACING ORDER. (NON-STANDARD FAUCET
AND OVERFLOW DRILLING LOCATIONS ARE
AVAILABLE. SPECIFY ON DRAWING AT RIGHT.)
203
203
356
914
1,118
38 DIA. 2 HOLES
89
6 R