Specification Sheets

ManualsBrandsElkay ManualsDrinking FountainsElkay 8 GPH ADA Wall Mount Fully Recessed Filtered Cooler with Front Pushbutton

(483mm)

(64mm)

(267mm)

(152mm)

40" (1016mm)

(1378mm)

(603mm)

(559mm)

11-1/4"

(286mm)

(584mm)

BOTH SIDES

HOLES

8 G.P.H. UNIT

(BOTH SIDES)

(37mm)

(406mm)

(298mm)

CLIPS

(438mm)

(298mm)

(1340mm)

11-1/4"

(286mm)

SCREWS

MOUNTING BOX

(13mm)

(171 mm)

(130 mm)

DRAIN OUTLET

(196 mm)

(94 mm)

DETAIL

INLET

TO FLOOR

(209 mm)

(139 mm)

WATER INLET

LEFT

SIDE

FASTENED IN MOUNTING BOX.

LINE BY OTHERS)

CONTROL

LINE - BY OTHERS

FILTER

IMPORTANT!

INSTALLER PLEASE NOTE:

This water cooler has been designed and built to provide water to the user which has

not been altered by materials in the cooler waterways.

The grounding of electrical equipment such as telephone, computers, etc., to water

lines is a common procedure. This grounding may be in the building but may also

occur away from the building. This grounding can cause electrical fee

dback into a

ater cooler creating an electrolysis which creates a metallic taste or causes an

increase in the metal content of the water. This condition is avoidable by installing the

cooler using the proper materials as shown below.

NOTICE

This water cooler must be connected to the water supply using a dielectric coupling.

The cooler is furnished with a non-metallic strainer which meets this requirem

ent.

he drain trap which is provided by the installer should also be plastic to completely

isolate the cooler from the building plumbing system.

Air Cooled Refrigerated Water Cooler

with WaterSentry

VII Filter System

Fully Recessed

Models LJNEM8 and LJNEM12

ROUGH-IN DIMENSIONS

Elkay

2222 Camden Court

Oak Brook, IL 60523

Printed in U.S.A.

8-3I (Rev. 10/12)