Specification Sheets

(483mm)
(64mm)
(267mm)
(152mm)
40" (1016mm)
(1378mm)
(603mm)
(559mm)
11-1/4"
(286mm)
(584mm)
BOTH SIDES
HOLES
8 G.P.H. UNIT
(BOTH SIDES)
(37mm)
(406mm)
(298mm)
CLIPS
CLIPS
(438mm)
(298mm)
(1340mm)
11-1/4"
(286mm)
SCREWS
SCREWS
MOUNTING BOX
(13mm)
(171 mm)
(130 mm)
DRAIN OUTLET
(196 mm)
(94 mm)
DETAIL
INLET
TO FLOOR
(209 mm)
(139 mm)
WATER INLET
LEFT
SIDE
FASTENED IN MOUNTING BOX.
LINE BY OTHERS)
CONTROL
LINE - BY OTHERS
FILTER
IMPORTANT!
INSTALLER PLEASE NOTE:
This water cooler has been designed and built to provide water to the user which has
not been altered by materials in the cooler waterways.
The grounding of electrical equipment such as telephone, computers, etc., to water
lines is a common procedure. This grounding may be in the building but may also
occur away from the building. This grounding can cause electrical fee
dback into a
w
ater cooler creating an electrolysis which creates a metallic taste or causes an
increase in the metal content of the water. This condition is avoidable by installing the
cooler using the proper materials as shown below.
NOTICE
This water cooler must be connected to the water supply using a dielectric coupling.
The cooler is furnished with a non-metallic strainer which meets this requirem
ent.
T
he drain trap which is provided by the installer should also be plastic to completely
isolate the cooler from the building plumbing system.
Air Cooled Refrigerated Water Cooler
with WaterSentry
®
VII Filter System
Fully Recessed
Models LJNEM8 and LJNEM12
ROUGH-IN DIMENSIONS
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2012 Elkay
8-3I (Rev. 10/12)