Dimensions Guide
Cutout in
No. of
Countertop
1
1
/2" Dia.
Inside Inside Inside (1
1
/2" Radius
Faucet Minimum Ship.
Model
Overall Left Bowl Center Bowl Right Bowl Corners)
Holes Cabinet Wt.
Number L W L W D L W D L W D L W 4" Center Size Lbs.
LGR4322C 43 22 14 18 10 7
1
/2 15
3
/4 5
1
/8 13
1
/2 16 8 42
3
/8 21
3
/8 34838
LGR4322 43 22 14 18 10 7
1
/2 15
3
/4 5
1
/8 13
1
/2 16 8 42
3
/8 21
3
/8 1, 2, 3, 4 or 5 48 33
GENERAL
Highest quality sink bowls seamlessly formed of #18 gauge,
type 304 (18-8) nickel bearing stainless steel. Self-rimming.
Model LGR4322C Sink Package includes LKE4124F faucet.
DESIGN FEATURES
Bowl Depths: 10" (left bowl), 5-1/8" (center bowl), 8" (right
bowl).
Bowl and Faucet Deck Recessed: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully protected by heavy duty Sound Guard
®
under-
coating to dampen sound and prevent condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 3
faucet holes as shown.
OPTIONAL ACCESSORIES
Cutting Boards: CB816, CB1613, CB1713, CBR1316, CBR1418,
CBS1316, CBS1418 or CBS715.
Rinsing Baskets: LKRB715, LKRB1611, LKRB1614 or
LKERBSS.
Bottom Grids: LKOBG1613 or LKOBG1814.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2005 Elkay
(Rev. 1/05) 1-53D
www.elkayusa.com
Model LGR4322C
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
Traditional Gourmet
Triple Bowl Sink and Sink Package
Models LGR4322 and LGR4322C
®
SPECIFICATIONS
These sinks comply with ANSI Standard A112.19.3M.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting
the requirements of the Uniform Plumbing Code.
I
A
P
M
O
U
P
C
F
O
U
N
D
E
D
1
9
2
6
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.