Installation Sheet

ManualsBrandsElkay ManualsPopular CollectionsElkay EZH2O Versatile Bi-Level Water Drinking Fountain and Bottle Filling Station with Hands-Free Operation, Glass Filler, and Cane Apron

9

Page 11 1000002243 (Rev. H - 01/21)

EZSTLDWS*1G EZSTL8WS*1G, 2G, 3G LZSTLDWS*1G LZSTL8WS*1G, 2G, 3G

INSTRUCTIONS TO MOVE THE BOTTLE FILLER & BASIN

TO THE LEFT SIDE (NON-REFRIGERATED) FOR ALTERNATE MOUNTING

VERSATILE BI-LEVEL

Using a 5/16" socket, remove

the (4) screws from the bottom

of each cooler to remove the

wrappers.

Non-Refrigerated Cooler side:

Carefully lift and tip the shroud/basin

assembly o󰀨 of the cooler frame.

Only disconnect the (2) black wires

coming from the shroud assembly going

to the solenoid valve and to the power

cord.

Disconnect the water line at the solenoid

valve. Reference (See Fig. 15, Pg.17)

for the operation of the quick connect

 ttings.

Using a #T20 (6 point star bit),

loosen the shroud screws.

Both sides, both coolers.

ONLY move the  ller panel and j-clip

to the refrigerated (right) side

if right side will be mounted 'high'.

Refrigerated Cooler side:

Carefully lift and tip the shroud/basin

assembly o󰀨 of the cooler frame.

Only disconnect the (2) black wires

coming from the shroud assembly that

go to the solenoid valve and to the cold

control.

Disconnect the water line at the solenoid

valve. Reference (Fig. 15, Pg.17) for the

operation of the quick connect  ttings.