Installation Sheet

Installation Instructions:

Crosstown Farmhouse Sinks

1333 Butterﬁeld Road, Suite 200 | Downers Grove, IL 60515 | elkay.com

Required Tools (not included)

Installation

Remove the false drawer front from the

base cabinet.

Place the sink in the cabinet and trace

onto the side walls of the cabinet to show

what material must be removed.

Elkay recommends removing material 1/16

of an inch at a time until the top of the sink

is ﬂush with the top of the cabinet.

Apply silicone caulk (not included) evenly

all around the top of the sink ﬂanges.

Position and align the sink in the cabinet.

Lower the countertop into place on the

cabinets. Press the silicone and ﬂange up

onto the countertop.

From the underside, fasten the mounting

brackets loosely into the pre-drilled

mounting holes in the countertop.

Lightly tighten the fasteners with a

screwdriver until the sink is snug against

the countertop.

WARNING: Always wear safety goggles and gloves when using

power tools or handling the sink to prevent personal injury.

Check alignment of the sink to the

countertop opening and then tighten

the fasteners until the sink is tight against

the countertop. Do not over tighten.

Wipe away any excess caulk with a rag.

Countertop

Mounting bracket

(opptional accessory)

Fastener

(not furnished)

Cut Resistant