ZLX Series ZLX-12P-UX, ZLX-15P-UX, ZLX-12P-EX, ZLX-15P-EX, ZLX-12P-AX, and ZLX-15P-AX en | User Manual
en 3 Table of contents 1 Safety 4 1.1 Important Safety Instructions 4 1.2 Suspension 5 1.3 FCC Information 5 1.4 Precautions 6 1.5 Notices 6 2 Description 7 3 System Overview 8 3.1 System features 8 3.2 Quick Setup 9 4 Tripod, pole mount, and floor monitor operation 10 4.1 Tripod or pole mount 10 4.2 Floor monitor 12 5 Amplifier DSP 13 5.1 Amplifier DSP controls 13 5.2 System Status 14 5.3 DSP controls 15 5.3.
ZLX Series 1 Safety 1.1 Important Safety Instructions The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the WARNING: TO REDUCE THE RISK OF presence of uninsulated “dangerous FIRE OR ELECTRIC SHOCK, DO NOT voltage” within the product’s enclosure OVEREXPOSE THIS APPLIANCE TO RAIN that may be sufficient magnitude to OR MOISTURE constitute a risk of electric shock to AVIS: RISQUE DE CHOC ELECTRIQUE, persons. NE PAS OUVRIR.
en 5 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. To completely disconnect AC power from this apparatus, the power supply cord must be unplugged. Suspension 1.
ZLX Series Notice! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
en 2 7 Description Thank you for choosing a ZLX series powered or passive loudspeaker system from ElectroVoice. Please take time to consult the manual to understand all the features built into your EV system and fully utilize its performance capabilities. ZLX models cut through the competition with the most complete and innovative package of features in their class–all of which work together to make it quicker and easier than ever to take control of your sound, whatever the gig.
ZLX Series 3 System Overview 3.1 System features ZLX-12P and ZLX-15P—Powered Loudspeaker Systems The only loudspeaker in its class that matches EV-engineered drivers with a custom-built Class-D amplifier module and powerful DSP. Whether pole-mounted or used as a floor monitor, ZLX delivers stunning sonic impact and intelligibility—the legendary “EV Sound” the pros trust. ▪ ZLX-12P:50 Hz - 20 kHz; 126 dB max SPL; 1000 W (Class D). ▪ ZLX-15P:42 Hz - 20 kHz; 127 dB max SPL; 1000 W (Class D).
en 3.2 9 Quick Setup The ZLX series loudspeakers from are fully integrated audio systems with carefully matched electronics and transducers. These products make it easy to setup a high quality sound system quickly with a minimum amount of cables and external electronics. Full-Range powered loudspeaker Models: ZLX-12P and ZLX-15P To set up a full-range powered loudspeaker, do the following: Step 1. Illustration Connect the AC power cord from a grounded line receptacle to the MAINS IN. 2.
ZLX Series 4 Tripod, pole mount, and floor monitor operation 4.1 Tripod or pole mount ZLX-12P and ZLX-15P loudspeakers mount on a tripod stand or on a pole above a subwoofer. Mounting a loudspeaker on a tripod stand Figure 4.1: Full-Range models on a tripod stand Caution! ! Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod stand to be certain it is capable of supporting the weight of the loudspeaker.
en 11 Mounting a loudspeaker on a pole Caution! ! Two (2) person lift and placement is recommended for the heavier loudspeakers. Single person lift and placement of heavier loudspeakers could cause injury. To mount a loudspeaker on a pole, do the following: 1. Place the subwoofer on a level stable surface. 2. Insert the pole into the pole cup on the top of the subwoofer. 3. If you are using a threaded pole mount, turn the pole clockwise to secure the pole to the subwoofer.
ZLX Series 4.2 Floor monitor ZLX-12P and ZLX-15P loudspeakers may be used as a floor monitor by placing the loudspeaker on the integral monitor angle. Setting up as a floor monitor To set up a loudspeaker as a floor monitor, do the following: 1. Place the loudspeaker on a level stable surface. 2. Safely route cables to prevent injury to performers, production crew, and audience members. Notice! Secure cables with wire ties or tape whenever possible.
en 5 Amplifier DSP 5.1 Amplifier DSP controls 13 The amplifier has a combination of controls and connectors to ensure the most versatile loudspeaker system. Full-Range loudspeaker control and monitoring interface The full-range loudspeaker DSP control menu selections are available for the ZLX-12P and ZLX-15P. 1 2 8 3 7 4 5 6 Figure 5.1: Full-Range loudspeaker amplifier panel 1. LCD – DSP control and monitoring interface. 2. MASTER VOL – Adjusts the sound level.
ZLX Series 5. OUTPUT – XLR output sends the mix of both input signals to another loudspeaker or subwoofer. INPUT LEVEL controls the signal level to OUTPUT. The MASTER VOL or DSP control settings do not affect OUTPUT. 6. INPUT – Balanced input for the connection of signal sources like mixing consoles, instruments, or microphones. Connections can be established using ¼ inch TRS or XLR connectors. 7. 8. MAINS IN – AC connection is established via an IEC-connector.
en 5.3 15 DSP controls An integrated DSP control menu allows the user to select multiple DSP system settings on the loudspeaker. To access the DSP controls menu, do the following: 1. Push the MASTER VOL knob. The DSP Control menu appears. 2. 3. Using the MASTER VOL knob, scroll through the menu items. Push the MASTER VOL knob to select the menu item you want to modify. The focus moves to the parameters on the right side of the DSP menu. 4. Using the MASTER VOL knob, scroll through the parameters.
ZLX Series 5.3.1 Full-Range loudspeaker DSP control menu The full-range loudspeaker DSP control menu selections are available for the ZLX-12P and ZLX-15P loudspeakers.
en INFO 17 [PRODUCT NAME] [FIRMWARE VERSION] EXIT Table 5.1: Full-Range Loudspeaker DSP Control Menu EXIT Menu The Exit menu is used to return to the home screen. Notice! The display returns to the home screen after two (2) minutes of inactivity. MODE Menu The Mode menu is used to configure the type of sound the loudspeaker delivers. Available options for this selection are: MUSIC, LIVE, SPEECH and CLUB. ▪ MUSIC – is used for recorded music playback and EDM applications.
ZLX Series BASS Menu The Bass menu is used to adjust the low frequency performance of the loudspeaker for different applications or personal preference. The parameter controls a parametric EQ filter that is centered on 60 Hz. The default is zero (0). LED Menu The LED menu shows power on and indicates limit. Available options for this selection are: ON, OFF or LIMIT. ▪ ON – turns the LED on when the power to the loudspeaker is ON. (Default) ▪ OFF – turns the LED off.
en 5. Push the MASTER VOL knob to select the desired character. 6. Turn the MASTER VOL knob to move to the next character entry. 19 Continue selecting characters until the desired name is entered. 7. Use the MASTER VOL knob to scroll to SAVE. 8. Push the MASTER VOL knob to select SAVE. 9. Repeat steps 3 through 8 to store additional customized user settings. 10. Select EXIT to return to the home screen. RECALL Menu The Recall menu allows you retrieve up to five (5) customized user settings.
ZLX Series 6 Recommended configurations 6.1 Powered loudspeakers 6.1.1 Daisy-chaining full-range systems MIC Notice! The direction of the arrow indicates the signal path. Mode: Speech Location: Pole Sub: Off Table 6.1: DSP settings loudspeaker on a tripod 2015.12 | 02 | F.01U.319.
en 6.1.2 21 MP3 player MONO configuration MP3 Player Notice! The direction of the arrow indicates the signal path. Mode: Music Location: Pole Sub: Off Table 6.2: DSP settings loudspeaker on a tripod Electro-Voice User Manual 2015.12 | 02 | F.01U.319.
ZLX Series 6.1.3 Using full-range systems as monitors Notice! The direction of the arrow indicates the signal path. Mode: Live Location: Monitor Sub: Off Table 6.3: DSP settings loudspeakers as monitors 2015.12 | 02 | F.01U.319.
en 6.1.4 23 Stacking full-range systems with subwoofers ZLX-15P EKX-18SP DSP CONTROL | MONITOR DSP PUSH FOR DSP CONTROL | MONITOR MASTER VOL OUTPUT 1 OUTPUT 2 INPUT 2 INPUT 2 INPUT 1 INPUT 1 OUTPUT 1 MASTER VOL OUTPUT 2 PUSH FOR DSP EKX EKX Mixer Notice! The direction of the arrow indicates the signal path. ZLX-15P Mode: Live Location: Pole Sub: EKX-18SP EKX-18SP Mode: Live Location: Normal Low Pass: ZLX-15P Table 6.
ZLX Series 6.2 Passive loudspeakers 6.2.1 Basic stereo system using full-range systems Basic stereo system using ZLX-12 or ZLX-15 systems (ZLX-15 versions shown). ZLX-12 or ZLX-15 Output B 45 Hz high pass filter (from mixer or processor) Output A ZLX-12 or ZLX-15 Q99 Amplifier Input B Input A Mixer NL4 Pin Configuration Pin 1+ and 1- Used Pin 2+ and 2- Not used Caution! ! Do not exceed the maximum load rating of the amplifier. Amplifier Load (per Output Channel) 2015.12 | 02 | F.01U.319.
en 25 Using full-range systems as stage monitors 6.2.2 Multiple ZLX-12 or ZLX-15 systems in monitor position (ZLX-15 versions shown). Output B 45 Hz high pass filter Output A Q99 Amplifier Input B Input A Mixer NL4 Pin Configuration Pin 1+ and 1- Used Pin 2+ and 2- Not used Caution! ! Do not exceed the maximum load rating of the amplifier. Amplifier Load (per Output Channel) Electro-Voice # of Speakers Nominal Minimum 1 8 Ohms 7.2 Ohms 2 4 Ohms 3.6 Ohms 3 2.7 Ohms 2.
ZLX Series Stacking full-range systems with subwoofers 6.2.3 This configuration allows a user to increase the low frequency performance without using additional amplifier channels (ZLX-15 and EKX-18S versions shown). ZLX-12 or ZLX-15 EKX-15S or EKX-18S 30 Hz high pass filter (from mixer or processor) Output B Output A Q99 Amplifier Input B Input A Mixer NL4 Pin Configuration Pin 1+ and 1- Used Pin 2+ and 2- Not used Caution! ! Do not exceed the maximum load rating of the amplifier.
en 7 27 Troubleshooting Problem Possible Cause(s) Action 1. Amplifier Connect a known working test loudspeaker to the No sound amplifier outputs. If there is no sound, verify all the electronics are on, the signal routing is correct, the source is active; the volume is turned up, etc. Correct/repair/replace as necessary. If there is sound, the problem is wiring. Wiring Verify you have connected the correct cables to the amplifier. Play something at a low level through the amplifier.
ZLX Series Problem Possible Cause(s) Action Incorrect gain Verify level controls of the source are properly structured structure or source by using the VU meter indicator on the LCD screen. If the input (mixing VU meter bar is solid or the system indicates LIMIT, the console/preamp) is input or source level is too high. overdriven 7. Microphone Incorrect gain Reduce the microphone levels at the mixing console or produces acoustic structure input source.
en 8 29 Technical data ZLX-12P and ZLX-15P ZLX-12P ZLX-15P Freq. Response (-3 dB): 65 Hz - 18 kHz1 55 Hz - 18 kHz1 Freq. Range (-10 dB): 50 Hz - 20 kHz1 42 Hz - 20 kHz1 Maximum SPL: 126 dB2 127 dB2 Coverage (H x V): 90° x 60° Power Rating: 1000 Watts LF Transducer: EVS-12K, 300 mm (12 in) Woofer EVS-15L, 380 mm (15 in) Woofer HF Transducer: Connectors: DH-1K (2) XLR/TRS Combo Jack (1) 3.
ZLX Series ZLX-12 ZLX-15 Nominal Impedance: 8Ω Minimum Impedance: 7Ω Connectors: Dual NL4 Enclosure: Polypropylene Grille: Dimensions (H x W x D): 1. 18 Guage Steel with Black Powder Coat 810 mm x 356 mm x 356 mm 685 mm x 423 mm x 383 mm (24 in x 14 in x 14 in) (27 in x 17 in x 15 in) Net Weight: 14.9 kg (32.8 lb) 16.6 kg (36.5 lb) Shipping Weight: 18.0 kg (39.6 lb) 22.0 kg (48.3 lb) Full Space Measurement, will have low frequency extension when mounted on floor or wall. 2. 8.
en 31 Passive loudspeakers Figure 8.3: ZLX-12 Frequency Response Figure 8.4: ZLX-15 Frequency Response 8.2 Dimensions Powered loudspeakers 610 mm [24 in] 356 mm [14 in] 356 mm [14 in] 183 mm [7 in] 43.4° 43.4° Bottom View Front View Left View Rear View Figure 8.5: ZLX-12P Dimensions Electro-Voice User Manual 2015.12 | 02 | F.01U.319.
ZLX Series 423 mm [17 in] 685 mm [27 in] 383 mm [15 in] 187 mm [7 in] 43.4° 43.4° Front View Bottom View Rear View Left View Figure 8.6: ZLX-15P Dimensions Passive loudspeakers 610 mm [24 in] 356 mm [14 in] 356 mm [14 in] 183 mm [7 in] 43.4° 43.4° Bottom View Front View Rear View Left View Figure 8.7: ZLX-12 Dimensions 423 mm [17 in] 685 mm [27 in] 383 mm [15 in] 187 mm [7 in] 43.4° 43.4° Bottom View Front View Left View Rear View Figure 8.8: ZLX-15 Dimensions 2015.12 | 02 | F.
en 9 Electro-Voice 33 Notes User Manual 2015.12 | 02 | F.01U.319.
ZLX Series 2015.12 | 02 | F.01U.319.
en Electro-Voice User Manual 35 2015.12 | 02 | F.01U.319.
Bosch Security Systems, Inc 12000 Portland Avenue South Burnsville MN 55337 USA www.electrovoice.
