RSL 5211LO EN Dishwasher User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 5 4. CONTROL PANEL............................................................................................. 6 5. PROGRAMMES.....................................
ENGLISH 3 responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com • • • • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. The ventilation openings in the base (if applicable) must not be obstructed by a carpet. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. 2. SAFETY INSTRUCTIONS 2.1 Installation • • • • • • • Remove all the packaging.
ENGLISH • • The appliance can release hot steam if you open the door while a programme operates. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • • • 2.5 Disposal WARNING! Risk of injury or suffocation. 3. PRODUCT DESCRIPTION 1 2 11 10 1 2 3 4 5 6 9 Upper spray arm Lower spray arm Filters Rating plate Salt container Air vent 8 7 6 5 7 8 9 10 11 5 Disconnect the appliance from the mains supply. Cut off the mains cable and discard it.
www.electrolux.com 4. CONTROL PANEL 1 2 5 1 On/off button 2 Programme indicators 3 Indicators 4 3 4 Programme button 5 Delay button 4.1 Indicators Indicator Description End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5. PROGRAMMES Programme 2) 3) 4) Degree of soil Programme Type of load phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 1.
ENGLISH Programme 5) Degree of soil Programme Type of load phases All • Prewash 7 Consumption values 1) Duration (min) Energy (kWh) Water (l) 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes).
www.electrolux.com Water hardness German de‐ grees (°dH) French de‐ grees (°fH) mmol/l Clarke de‐ grees Water softener level 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.
ENGLISH • The indicator starts to flash. 3. Wait until the indicator goes off. The indicator continues to flash. • The end indicator indicates the current setting: End indicator off = Acoustic signal off. 7. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5.
www.electrolux.com 7.2 How to fill the rinse aid dispenser A D CAUTION! Only use rinse aid specifically designed for dishwashers. B C You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity). B A M AX 4 1 3 2 + 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. 3.
ENGLISH A 30 B 11 Starting a programme with delay start D 1. Set a programme. 2. Press Delay to delay the start of the programme of 3 hours. 20 C 1. Press the release button (B) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (A). 3. If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). 4. Close the lid. Make sure that the release button locks into position. 8.
www.electrolux.com 9. HINTS AND TIPS 9.1 General • The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • • • • • • Remove larger residues of food from the dishes into the waste bin. Do not pre-rinse dishes by hand. When needed, use the prewash programme (if available) or select a programme with a prewash phase. Always use the whole space of the baskets.
ENGLISH • Make sure that the spray arms can move freely before you start a programme. 9.5 Before starting a programme Make sure that: • • • • • The filters are clean and correctly installed. The cap of the salt container is tight. The spray arms are not clogged. There is dishwasher salt and rinse aid (unless you use multi- tablets). The position of the items in the baskets is correct. • • 13 The programme is applicable for the type of load and for the degree of soil.
www.electrolux.com CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 10.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 10.3 External cleaning 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
ENGLISH Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. Problem and alarm code Possible solution You cannot activate the appliance. • • The programme does not start. • • • The appliance does not fill with wa‐ ter. • The end indicator flashes 1 time intermittently. • Acoustic signal sounds 1 time in‐ termittently. • • • • • 15 With some problems the end indicator flashes intermittently indicating a malfunction.
www.electrolux.com Problem Possible solution There are stains and dry wa‐ • ter drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. The quality of the rinse aid can be the cause. The dishes are wet. The programme does not have a drying phase or has a drying phase with low temperature. The rinse aid dispenser is empty. The quality of the rinse aid can be the cause.
ENGLISH 17
www.electrolux.
ENGLISH 19
100007240-A-492014 www.electrolux.
