User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. INSTALLATION
- 4. PRODUCT DESCRIPTION
- 5. DAILY USE
- 5.1 Activating and deactivating
- 5.2 Automatic Switch Off
- 5.3 The heat setting
- 5.4 Using the cooking zones
- 5.5 Bridge
- 5.6 Automatic Heat Up
- 5.7 PowerBoost
- 5.8 PowerBoost with a double ring cooking zone
- 5.9 Timer
- 5.10 Pause
- 5.11 Lock
- 5.12 Child Safety Device
- 5.13 OffSound Control (Deactivating and activating the sounds)
- 5.14 Power management
- 5.15 Hob²Hood
- 6. HINTS AND TIPS
- 7. CARE AND CLEANING
- 8. TROUBLESHOOTING
- 9. TECHNICAL DATA
- 10. ENERGY EFFICIENCY
- 목차
- 1. 안전 정보
- 2. 안전 지침
- 3. 설치
- 4. 제품 설명
- 5. 일상적 사용
- 6. 유용한 정보
- 7. 관리 및 청소
- 8. 문제 해결
- 9. 기술 정보
- 10. 에너지 효율성
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information below from the rating plate.
The rating plate is on the bottom of the
hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Speak to your local Service
Centre.
3.4 Assembly
min.
50mm
min.
500mm
min.
12
min.
60
min.
28
If the appliance is installed
above a drawer, the hob
ventilation can warm up the
items stored in the drawer
during the cooking process.
www.youtube.com/electrolux
www.youtube.com/aeg
How to install your Electrolux
Induction Hob - Worktop installation
ENGLISH 7