GK78TSO FR TABLE DE CUISSON NOTICE D'UTILISATION
www.electrolux.com TABLE DES MATIÈRES 1. CONSIGNES DE SÉCURITÉ................................................................................ 2 2. INSTRUCTIONS DE SÉCURITÉ........................................................................... 4 3. DESCRIPTION DE L'APPAREIL........................................................................... 6 4. UTILISATION QUOTIDIENNE............................................................................... 8 5. CONSEILS.................................
FRANÇAIS 3 blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.
www.electrolux.com • • • • • • N'essayez jamais d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. N'entreposez rien sur les surfaces de cuisson. Ne posez pas d'objets métalliques tels que couteaux, fourchettes, cuillères ou couvercles sur la table de cuisson car ils pourraient chauffer. N'utilisez pas de nettoyeur vapeur pour nettoyer l'appareil.
FRANÇAIS • Ne laissez pas le câble d'alimentation s'emmêler. • Assurez-vous qu'une protection antiélectrocution est installée. • Utilisez un collier anti-traction sur le câble. • Assurez-vous que le câble d'alimentation ou la fiche (si présente) n'entrent pas en contact avec les surfaces brûlantes de l'appareil ou les récipients brûlants lorsque vous branchez l'appareil à des prises électriques situées à proximité. • N'utilisez pas d'adaptateurs multiprises ni de rallonges.
www.electrolux.com • Ne laissez pas de récipients chauds sur le bandeau de commande. • Ne laissez pas le contenu des récipients de cuisson s'évaporer complètement. • Prenez soin de ne pas laisser tomber d'objets ou de récipients sur l'appareil. Sa surface risque d'être endommagée. • Ne faites jamais fonctionner les zones de cuisson avec des récipients de cuisson vides ou sans aucun récipient de cuisson. • Ne placez jamais de papier aluminium sur l'appareil.
FRANÇAIS 3.2 Description du bandeau de commande 1 2 3 4 5 12 6 7 11 10 8 9 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. Touche sensitive Fonction Description MARCHE/ARRÊT Pour allumer et éteindre la table de cuisson. Touches verrouil. / Dispositif de sécurité enfants Pour verrouiller ou déverrouiller le bandeau de commande.
www.electrolux.com Affichage Description La zone de cuisson est activée. - La fonction STOP+GO est activée. La fonction Démarrage automatique de la cuisson est activée. + chiffre Une anomalie de fonctionnement s'est produite. / OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) : continuer la cuisson / maintien au chaud / chaleur résiduelle. / La fonction Touches verrouil. /Dispositif de sécurité enfants est activée. La fonction Arrêt automatique est activée. 3.
FRANÇAIS 4.3 Niveau de cuisson 4.6 Minuteur Pour régler ou modifier le niveau de cuisson : Minuteur dégressif Vous pouvez utiliser cette fonction pour régler la durée de fonctionnement de la zone de cuisson, uniquement pour cette session. Appuyez sur le niveau de cuisson souhaité sur le bandeau de sélection, ou déplacez votre doigt sur le bandeau de sélection jusqu'à atteindre le niveau de cuisson souhaité. 9 Sélectionnez d'abord la zone de cuisson, puis réglez la fonction.
www.electrolux.com Pour sélectionner la zone de cuisson : appuyez sur à plusieurs reprises jusqu'à ce que l'indicateur de la zone de cuisson correspondante s'affiche. . touche du minuteur. s'allume. Lorsque le voyant de la zone de cuisson clignote lentement, le minuteur démarre. Pour contrôler la durée de fonctionnement de la zone de cuisson sélectionnée : sélectionnez la zone de cuisson à l'aide de . Le voyant de la zone de cuisson clignote rapidement.
FRANÇAIS 11 10 secondes qui suivent. Vous pouvez utiliser la table de cuisson. Lorsque vous • éteignez la table de cuisson avec fonction est de nouveau activée. - les signaux sonores sont activés • Pour confirmer le réglage, attendez que la table de cuisson s'éteigne automatiquement. , la 4.10 OffSound Control (Désactivation et activation des signaux sonores) Éteignez la table de cuisson. Appuyez sur pendant 3 secondes. L'affichage s'allume, puis s'éteint. Appuyez sur pendant 3 secondes.
www.electrolux.com Niveau de cuisson Utilisation : Durée (min) Conseils 1-3 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-3 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson. 3-5 Faire mijoter des plats à base de riz et de laitage, réchauffer des plats cuisinés. 25 - 50 Ajoutez au moins deux fois plus d'eau que de riz. Remuez les plats à base de lait durant la cuisson.
FRANÇAIS • Une fois que la table de cuisson a suffisamment refroidi, enlevez : traces de calcaire et d'eau, projections de graisse, décolorations métalliques luisantes. Nettoyez la table de cuisson 13 à l'aide d'un chiffon humide et d'un peu de détergent. Après le nettoyage, séchez l'appareil à l'aide d'un chiffon doux. 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.
www.electrolux.com Problème Cause probable Solution Voyant de chaleur résiduelle La zone de cuisson n'est ne s'allume pas. pas chaude parce qu'elle n'a fonctionné que peu de temps. Si la zone de cuisson a eu assez de temps pour chauffer, faites appel à votre service après-vente agréé. La fonction Démarrage automatique de la cuisson ne fonctionne pas. Laissez la zone de cuisson refroidir. La zone est chaude. Le niveau de cuisson le plus Le niveau de cuisson le plus élevé est réglé.
FRANÇAIS Assurez-vous d'utiliser correctement l'appareil. En cas d'erreur de manipulation de la part de l'utilisateur, le déplacement du technicien du service après-vente ou du vendeur pourra être facturé, même en 15 cours de garantie. Les instructions relatives au service après-vente et aux conditions de garantie figurent dans le livret de garantie. 8. INSTALLATION AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 8.
www.electrolux.com 8.6 Montage INSTALLATION SUPERPOSÉE min. 500mm min. 50mm min. 12 mm min. 20 mm R 5mm min. 55mm +1 490+1mm 750 mm min.
FRANÇAIS 17 INSTALLATION INTÉGRÉE R10mm R5mm 7mm 12mm min. 12 mm min. 55mm min. 20 mm 490+1mm 750+1mm 514+1mm 774+1mm min. 28 mm 9. CARACTÉRISTIQUES TECHNIQUES 9.1 Plaque signalétique Modèle GK78TSO Type 58 HBD AA XO PNC 941 591 786 00 400 V 50 Hz Numéro de série .......... ELECTROLUX 7.9 kW 9.2 Caractéristiques des zones de cuisson Zone de cuisson Puissance nominale (niveau de cuisson max.
www.electrolux.com Zone de cuisson Puissance nominale (niveau de cuisson max.) [W] Diamètre de la zone de cuisson [mm] Avant droite 1200 145 Arrière droite 1500 / 2600 165 / 290 Pour des résultats de cuisson optimaux, utilisez des récipients qui ne dépassent pas le diamètre de la zone de cuisson. 10.
FRANÇAIS les ordures ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux. * Pour la Suisse: Où aller avec les appareils usagés ? Partout où des appareils neufs sont vendus, mais aussi dans un centre de collecte ou une entreprise de récupération officiels SENS. La liste des centres de collecte officiels SENS est disponible sous www.erecycling.
867317907-B-172015 www.electrolux.