User manual

installation electrolux 31
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from the
bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
3. With a suitable spanner unscrew and
remove the central rear bolt A. Slide
out the relevant plastic spacer.
HEC0001
HEC0008
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
5. Remove the bracket D and tighten up
the six smaller bolts C.
C
C
HEC0014
HEC0011S
D
HEC0003S
C
C
B
B
HEC0002S
A
132980530gb.qxd 19/07/2006 9.33 Pagina 31