Installation Instructions

Locate hole plugs in the small bag supplied with wash-

er instruction guides. Cut them apart from each other

and insert them in the holes in washer back panel.

The drain hose is secured in place with two plastic

latching clamps. Press the locking tab and release

the drain hose.

Releasing Drain Hose

Installing hole plugs

x 3

x 2

IMPORTANT

Save all shipping bolts and spacers for future use. If the washer

is to be transported at a later date, the shipping hardware must

be reinstalled to help prevent shipping damage.

NOTE

Rubber expansion material on spacers may need time to

relax before they can be easily pulled through shipping hole.

Removing shipping hardware

Remove all of the following from the back of the washer:

• 3 shipping bolts

• 2 plastic clamps

• 3 shipping spacers