Datasheet

Revision date: 26/07/2017 Revision: 0
Contact Treatment Grease
Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible. Ensure all respiratory protective
equipment is suitable for its intended use and is ‘CE’-marked. Check that the respirator fits
tightly and the filter is changed regularly. Gas and combination filter cartridges should comply
with European Standard EN14387. Full face mask respirators with replaceable filter cartridges
should comply with European Standard EN136. Half mask and quarter mask respirators with
replaceable filter cartridges should comply with European Standard EN140.
Environmental exposure
controls
Keep container tightly sealed when not in use.
SECTION 9: Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
Appearance Grease.
Colour Cream.
Odour Oil-like.
pH Not available.
Melting point Not available.
Initial boiling point and range Not available.
Flash point Not available.
Evaporation rate Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or
explosive limits
Not available.
Vapour pressure 0.001 mm Hg @ 20°C/68°F
Vapour density Not available.
Bulk density 0.85 kg/l
Solubility(ies) Not available.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Not available.
Explosive properties Not considered to be explosive.
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity See the other subsections of this section for further details.
10.2. Chemical stability
Stability Stable at normal ambient temperatures and when used as recommended. Stable under the
prescribed storage conditions.
5/
9