User Manual

RE3
UHF Wireless RE3-HHT handheld transmitter | en 37
Electro
-Voice Installation manual 2018-12 | 01 |
F.01U.362.808
3 Control section
This section contains the LCD display, three menu navigation buttons,
power button, charging contacts, LED indicator, and the sync port on
opposite side of display.
4
Sliding menu
navigation button
cover
This sliding cover protects the menu navigation buttons. Sliding the
cover toward the LCD display reveals the buttons. Close the cover by
sliding it in the other direction protects the buttons.
5 LCD Display Backlit LCD displays all operating information and menus.
6
Battery
compartment
Holds two AA or AA-size rechargeable cells. Install AA cells according
to polarity orientation as shown.
7 Charging contact
Three charging contacts, one to the left of the power button and two to
the right are for use when using the optional BC2 battery charger and
rechargeable cells.
8 Power button
This is a multi-purpose button, functioning as a power on and off
switch, a transmitter mute switch, as well as a menu escape switch.
To power ON transmitter: press for one second
To power OFF transmitter: press and hold until transmitter turns off.
PW OFF is displayed.
To MUTE transmitter: press briefly (less than one second). MUTE
appears on LCD.
To UNMUTE transmitter (when muted): press briefly (less than one
second). MUTE disappears on LCD display.
While in parameter edit mode, press to return to home screen.
CANCEL appears on the screen and no setting changes are saved.
9 Charging contacts
Three charging contacts, one to the left of the power button and two to
the right are for use when using the optional BC2 battery charger and
rechargeable cells.
10 LED indicator
Indicates transmitter operating status as follows:
Glows solid green when transmitter is on.
Flashes green when transmitter is in mute mode.
Glows solid red when battery is low.
11 Transmitter tail end The lowermost surface in the display and control section.
12 SET button
The most commonly used menu navigation button, it is a multi-
purpose action button which functions as an enter key, a menu
advance key, and a save or store key.
13
▼ down button
This menu navigation button adjusts the value of an editable
parameter. Pressing the ▼ button will decrease the displayed value of
the current parameter, or the next state condition value below the
displayed state value.