USER MANUAL PREMIUM LOW ENERGY COMPRESSOR DEHUMIDIFIER WITH DIGITAL HUMIDISTAT AND SMART APP CONTROL CD12PRO-LE – 12 Litres per day CD20PRO-LE – 20 Litres per day Thank you for choosing electriQ. Please read this user manual before using this innovative dehumidifier and keep it safe for future reference Visit our page www.electriQ.co.
CONTENTS SAFETY INSTRUCTIONS 2 INSTALLATION 5 CONTROL PANEL 7 QUICK REFERENCE GUIDE 9 POSITIONING 11 WATER DRAINAGE 12 SETTING UP AND USING THE APP 13 CARE AND MAINTENANCE 23 TROUBLESHOOTING 24 TECHNICAL DATA 25 1
SAFETY INSTRUCTIONS IMPORTANT • • • • • • • • • • • • • • • • • • • • • • • • Carefully read the instructions before operating the unit This appliance is for indoor use only and intended for use in a domestic environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other injuries to user or property. Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet.
• • • • • • • • • • • • • • • • The appliance must be placed in a room without sources of ignition (for example open flames, an operating gas appliance or an operating electric heater). R290 refrigerant gas complies with European environmental directives. R290 has a low GWP (Global Warming Potential) of 3. The CD12PRO-LE contains about 60g of R290 refrigerant gas. The CD20PRO-LE contains about 75g of R290 refrigerant gas.
VISUAL SAFETY GUIDE ON WHERE OR WHEN NOT TO USE YOUR DEHUMIDIFIER 4
INSTALLATION Remove any water from within the water tank before starting the unit. In order to save energy, do not open windows or doors while the unit is running. Place the unit on a hard / flat surface. On first use run the unit continuously for 24 hrs. TO REDUCE NOISE LEVELS: Place a piece of carpet or a rubber mat under the unit to reduce any vibrations while the unit is running. The CD12PRO-LE and CD20PRO-LE dehumidifiers use compressor technology to extract water from the environment.
PARTS 1 . Louvres 3 . Air Outlet 4 . Humidity Indicator light 2 . Handle 5 . Wheels 6 . Control Panel 7 . Pre - filter/activated Carbon filter 8 . Air inlet 9 . Continuous Drain Port 10 . Back Cover 11 . Water tank 12 .
CONTROL PANEL Humidity Indicator Down Timer Up Oscillation UV Mode Power On/Off Water tank full Defrost indicator POWER Turn the appliance on/off MODE Button Select the function of the unit between SMART / HIGH / LOW / and FAN. The LED’s next to the button will show which mode is selected. SMART MODE: The unit will default to SMART mode the first time it is switched on and remains in this mode until another program is chosen.
OSC. (Oscillation function) There are three different options for the outer louvre on the unit. It can be set at 45 or 90 degrees, or alternatively to swing. Use the dehumidifier at a 45-degree angle or with the swing function for Laundry mode UV LIGHT (Air purifier function) To activate the UV function, press the "UV" button and the indicator light will illuminate.
QUICK REFERENCE GUIDE Power Button: Press to turn the dehumidifier on and off. Oscillation Button: Press once to make the louvre swing and press again to lock at 45 degrees, press again to lock at 90 degrees. Do not operate the unit if the self-opening louvres do not open on power on. Timer: Press the timer button, then use the timer (1-24 hrs, start/ stop timer).
OTHER FEATURES AND INDICATORS TANK FULL LIGHT When the water tank is full, removed or incorrectly inserted the unit will stop dehumidifying, the red tank full light will illuminate, and the unit will beep. Empty the tank and reinsert it correctly to resume operation. AUTO DEFROST When frost builds up on the evaporator coils, the compressor will cycle off, and the unit will go in to defrost mode. Following the completion of the defrost mode, the unit will return to the the previously operating settings.
POSITIONING THE DEHUMIDIFIER A badly positioned dehumidifier will have little effect. In positioning the dehumidifier please ensure circulation of air in not restricted around the unit. Allow at least 20 cm space around the unit. This dehumidifier is designed only for indoor residential or small office applications and any commercial or industrial use will invalidate the warranty. Use in an enclosed area for maximum efficiency. Close all doors, windows to create an effective operating environment.
WATER DRAINAGE When the water tank is full, the unit will stop automatically. When this happens the TANK FULL red light will show on the control panel, and the unit will bleep. NOTE: Only empty the water tank when it is full or before moving or storing the unit. There are two ways to dispense collected water. 1. USE THE TANK When the tank is full, the unit will automatically stop running, and the Tank Full indicator will flash. Slowly pull out the tank.
SETTING UP THE WIFI FUNCTION BEFORE YOU START • Ensure your router provides a standard 2.4ghz connection. • If your router is dual-band ensure that both networks have different network names (SSID). The provider of your router / Internet service provider will be able to provide advice specific to your router. • Place the dehumidifier as close as possible to the router during setup.
REGISTER THE APP 1. Press on the register button at the bottom of the screen. 4. A verification code will be sent by the method selected in step 3. Enter the code into the app. 2. Read the Privacy policy and press the Agree Button. 5. Type in the password you would like to create. This needs to be 6-20 characters, with letters and numbers. 14 3. Enter your email address or phone number and press continue to register. 2. The app is now registered.
SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses. As such, during the setup process, the app requires that different areas are created and named to allow easy management of all your devices. When devices are then added, they are assigned to one of the rooms you have created. CREATING ROOMS 1. Press on the ADD HOME button. 3.
CONNECTING USING QUICK CONNECTION Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing twice per second. If not follow the instructions for changing the connection mode. Ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4. Enter your WiFi password and press confirm. 2.
CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure the unit is in standby mode, with the WiFi light flashing once per second. If not, follow the instructions for changing the connection type. Ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4.
CONTROLLING YOUR DEVICE THROUGH THE APP THE HOME SCREEN Add a device Chose the device to control Access the user profile Smart Scenes / Automation DEVICE SCREEN Name of dehumidifier: Press to enter the Device Screen ON / OFF Button: Use to quickly turn the unit on or off.
DEVICE SCREEN The device screen is the main control screen for the dehumidifier, providing access to the controls to amend the functions of the dehumidifier Profile: Use to change the name of the dehumidifier and amend user settings. Back: Returns to the Home Screen ON / OFF Button: Use to turn the unit on or off. Mode: Change the operating mode between: AUTO/ FAN/ HIGH/ LOW Set Humidity: The desired humidity can be set between 35-80 percent. UV: Turn the UV light On and Off.
SMART SCENES Smart Scenes is a powerful tool providing the option to customise the operation of the dehumidifier based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two catagories Scene and Automation. SCENE Scene allows for a one touch button to be added to the Home screen. The button can be used to change a number of settings in one go, and can change all the settings within the unit.
AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, indoor temperature, humidity of the room, weather conditions, and a range of other influences. 1. Press on the Smart Scene tab at the bottom of the Home screen 2. Press on the Plus in the top right corner to add a smart scene. 4. Setup is very similar to the scene setup on the previous page, and includes an extra section for specifying a trigger for the scene to start. 3.
DEVICE DETAILS SCREEN The device details screen gives you the option to edit the details for the devicel, and use some of its additional features. The device details screen can be accessed from the device screen by pressing on the symbol in the top right hand corner. CHANGING THE NAME OF YOUR DEVICE The top option within this allows you to change the name of the device to something relevant to the use of the product, such as “Living Room Dehumidifier”.
CONNECTION TROUBLESHOOTING 1. 2. 3. 4. 5. 6. 7. Check whether the device is powered on and is in the correct standby mode, if not please refer to the CHANGING BETWEEN CONNECTION MODES section on page 12. Ensure the wifi password has been entered into the app correctly (Case sensitive) Check that the phone is connected to the wifi you are connecting the device to. Ensure the network you are connecting it to is 2.
FREQUENTLY ASKED QUESTIONS Why doesn’t the dehumidifier seem to extract much water if the temperature is low? This is a compressor dehumidifier which works best in temperatures above 15⁰C. If the temperature is low and the air is dryer than the setting on the humidistat the unit will not extract water. If you want to use a dehumidifier for outside buildings, unheated properties, boats or garages please check our desiccant range.
TECHNICAL DATA Model Voltage CD12PRO-LE-V2 CD20PRO-LE-V2 1Ph, 220-240V～50Hz 1Ph, 220-240V～50Hz Dehumidifying capacity 12 L / day (at 30⁰ C / 80%RH) 20 L / day (at 30⁰ C / 80%RH) Fan Speeds 2 2 Power Consumption 180W 270W Running Amps 0.91 Amps 1.2 Amps Tank Capacity 4 litres 4 litres Humidity settings range 35%～80% 35%～80% IP RATING IPX1 IPX1 Refrigerant R290, 60 grams R290, 75 grams Airflow m3/h 180 180 High / Low Pressure 1.5/0.5MPa 1.5/0.
electriQ UK SUPPORT www.electriQ.co.uk/support Office hours: 9AM - 5PM Monday to Friday 0330 390 3062 Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA DECLARATION OF CONFORMITY Hereby, electriQ declares that this Portable air conditioner is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.electriQ.co.
