Specification

TECHNICAL SPECIFICATION ELASTILON®
2 mm double sided adhesive
MATERIAL PROPERTIES
P.E. Foam
Quality: Chemically crosslinked Polyethylene
Density: 50 kg/m³
Tensile strength (longitudal): 0,60 N/mm²
Elongation (longitudal): 160%
Service temperature: -80°C / +100°C
Thermal conductivity: 0,038 W/mK (at 0°C)
Waterabsorption: < 0,4% (after 7 days)
< 0,6% (after 28 days)
Compression set at 25% compression: 3% (22 hrs, 23°C; after 24 hours relaxation)
Resistance to compression at 30% compression: 55 kPa
No fungus building
Free of CFK’s
Test according to EN 14293 (Adhesives Approved
for bonding parquet to subfloor -
testmethods and minimum requirements)
Adhesive
Adhesive thickness: 0,15 mm
Adhesive weight: 80 g/m³
Adhesion (N/25 mm): 18 N
Static shear resistance (25 mm x 25 mm): 500 g/25 mm²
Temperature limitations
Application: +10°C minimum
Service: -50°C / +100°C
Short peak: +120°C
Ageing resistance: very good
Storage: 2 years @ 21°C, 50% relative humidity,
no direct sunlight/ strong artificial light
The information on these sheets has been compiled from the results of various test data.
This publication however, cannot be considered as a commitment or as a written guarantee by OSBE
BV. The information presented cannot replace the necessity of serious testing of the product in its
actual application.
Elastilon
®
is a worldwide patented system.