LED RING PENDANT MODEL #83665 Français p. 10 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS E B A G I M H G K F J G C D L G PART A B C D E F G DESCRIPTION Canopy Mounting Bracket Fixture Body Arm Small LED Ring Large LED Ring Swivel QTY 1 1 1 8 2 2 8 PART H I J K L M 2 DESCRIPTION Medium LED Ring Set Screw Cable Cord Extra-Large LED Ring Compression Fitting QTY 2 1 1 1 2 1
HARDWARE CONTENTS AA BB DD CC Wire Canopy Connector Short Screw Qty: 3 Machine Qty: 2 Screw Qty: 2 EE FF Anchor Anchor Screw Qty: 4 Qty: 4 Allen Tool Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1. The hanging length of the cable (J) for this fixture is adjustable.
ASSEMBLY INSTRUCTIONS 3. Connect the mounting bracket (B) to the outlet box with short machine screws (BB). Outlet Box 3 Hardware Used BB Short Machine Screw x2 BB B 4. Screw anchor screws (FF) through mounting bracket (B) and into anchors (EE). 4 EE B Hardware Used FF Anchor Screws FF x4 5. Connect safety cable located in canopy (A) to the safety cable loop located on mounting bracket (B).
ASSEMBLY INSTRUCTIONS 6. Wire connection guide: Ground wire: 6 • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 7. Pass canopy (A) over mounting bracket (B) and secure with canopy screws (CC). 7 B Hardware Used CC Canopy Screw x2 CC A 8 C E FF D G 8. Raise small LED ring (E) to fixture body (C). Connect wiring from arm (D) to swivel (G). Insert swivel (G) into arm (D) and secure with set screw using the allen tool (DD). Repeat this step for medium LED ring (H), large LED ring (F), and extra-large LED ring (L).
WARRANTY élan Lighting warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. LED Rail, LED Lanterns. LED Wall Sconces, LED Pendants and LED Chandeliers for single family residences are warranted for one (1) year on the Light Engine and all other electrical components.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART B AA BB CC EE FF DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Canopy Screw Anchor Anchor Screw B PART # XBAR83665 WC001 SCR832X050 CS83298 AB001 AS001 BB AA CC EE FF Printed in China Rev.
LUMINAIRE SUSPENDU ANNEAUX À DEL MODÈLE #83665 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE E B A G I M H G K F J G C D L G PIÈCE A B C D E F G DESCRIPTION Pavillon Support de fixation Corps du luminaire Bras Petit anneau à DEL Grand anneau à DEL Émerillon QTÈ 1 1 1 8 2 2 8 PIÈCE DESCRIPTION H Anneau moyen à DEL I Vis de réglage J Câble Cordon K L Très grande taille anneau à DEL Raccord à compression M 11 QTÈ 2 1 1 1 2 1
QUINCAILLERIE INCLUSE AA BB CC DD Capuchon Vis du de connexion Vis à pavillon Qté : 3 métaux Qté : 2 courtes Qté : 2 Clé Allen Qté : 1 CONSIGNES DE SÉCURITÉ EE FF Pièce d’ancrage Vis à pièce Qté : 4 d’ancrage Qté : 4 Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité.
PRÉPARATION Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les pièces. Comparez les pièces dans l’emballage avec la liste du contenu. S’il y a des pièces manquantes ou endommagées, ne tentez pas d’assembler le produit. Temps d’assemblage approximatif : de 30 à 60 minutes Outils requis pour l’assemblage (non fournis) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder, ruban isolant, échelle, lunettes de sécurité. INSTRUCTIONS POUR L'ASSEMBLAGE 1.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Fixez le support de fixation (B) à la boîte de sortie à l'aide des vis à métaux courtes (BB). Boîte de sortie 3 Quincaillerie utilisée BB Vis à métaux courtes x2 B 4. Vissez les vis d'ancrage (FF) à travers le support de fixation (B) et dans les ancrages (EE). BB 4 EE B Quincaillerie utilisée FF Vis à pièce d’ancrage FF x4 5. Connectez le câble de sécurité situé dans le pavillon (A) à la boucle du câble de sécurité située sur le support de fixation (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Guide de raccordement électrique 6 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre située sur le support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre.
INSTRUCTIONS POUR L'ASSEMBLAGE 7. Faites passer le pavillon (A) sur le support de fixation (B) et fixez à l'aide des vis du pavillon (CC). 7 B Quincaillerie utilisée CC Vis du pavillon x2 CC A 8 C E FF D G 8. Placez le petit anneau à DEL (E) sur le corps du luminaire (C). Connectez le câblage du bras (D) à l’émerillon (G). Insérez l'émerillon (G) dans le bras (D) et fixez à l'aide de la vis de réglage en utilisant la clé Allen (FF).
GARANTIE Kichler Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (1) an à compter de la date d'achat par l'acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE B AA BB CC EE FF Nº DE PIÈCE DESCRIPTION Support de fixation Capuchon de connexion Vis à métaux courtes Vis du pavillon Pièce d’ancrage Vis à pièce d’ancrage B XBAR83665 WC001 SCR832X050 CS83298 AB001 AS001 BB AA CC EE FF Imprimé en Chine Rev.