LED ISLAND PENDANT MODEL #83390 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS A C B PART A B C DESCRIPTION Canopy Cable Compression Fitting 2 QUANTITY 1 2 2
HARDWARE CONTENTS AA BB CC DD EE FF GG Ground Screw Qty: 1 Wire Threaded Connector Short Knob Qty: 3 Machine Qty: 2 Screw Qty: 2 Anchor Mounting Bracket Qty: 1 Qty: 4 Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1. The hanging length of the cable (B) for this fixture is adjustable.
ASSEMBLY INSTRUCTIONS 2. Temporarily raise mounting bracket (DD) to ceiling. Mark location for anchor (FF). Use 9/32 size drill to drill holes for anchor (FF). Insert anchor (FF) into hole. 2 Ceiling FF Hardware Used FF Anchor x4 DD 3. Connect the mounting bracket (DD) to the outlet box with short machine screws (BB). 3 Outlet Box (Not Included) Hardware Used Short Machine BB Screw x2 BB DD Mounting Bracket x1 4. Screw anchor screws (GG) through mounting bracket (DD) and into anchors (FF).
ASSEMBLY INSTRUCTIONS 5. Wire connection guide: 5 Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw (EE) on mounting bracket (DD) no less than 2 in. from wire end. Tighten ground screw (EE). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw (EE) on mounting bracket (DD).
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION Fixture may be wired incorrectly.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART AA BB CC DD FF GG DESCRIPTION Wire Connector Short Machine Screw Threaded Knob Mounting Bracket Anchor Anchor Screw AA Rev.
LUMINAIRE SUSPENDU ÎLE À DEL MODÈLE #83390 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE A C B PIÈCE A B C DESCRIPTION Pavillon Câble Raccord à compression 10 QUANTITÉ 1 2 2
QUINCAILLERIE INCLUSE AA BB CC Capuchon Boutons de connexion Vis à filetés Qté : 3 métaux Qté : 2 courtes Qté : 2 CONSIGNES DE SÉCURITÉ DD EE FF GG Vis de mise à la terre Qté : 1 Support de fixation Qté : 1 Pièce d’ancrage Vis à pièce Qté : 4 d’ancrage Qté : 4 Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité.
PREPARATION Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les pièces. Comparez les pièces dans l’emballage avec la liste du contenu. S’il y a des pièces manquantes ou endommagées, ne tentez pas d’assembler le produit. Temps d’assemblage approximatif : de 30 à 60 minutes Outils requis pour l’assemblage (non fournis) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder, ruban isolant, échelle, lunettes de sécurité, perceuse et foret de 9/32 po.
INSTRUCTIONS POUR L'ASSEMBLAGE 2. Placez temporairement le support de fixation (DD) au plafond. Marquez les emplacements des ancrages (FF). Utilisez une perceuse équipée d'un foret de 9/32 po afin de percer les trous pour les ancrages (FF). Insérez les ancrages (FF) dans les trous. 2 Plafond FF Quincaillerie utilisée Pièce FF d’ancrage x4 DD 3. Fixez le support de fixation (DD) à la boîte de sortie à l'aide des vis à métaux courtes (BB).
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Guide de raccordement électrique 5 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (EE) située sur le support de fixation (DD), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (EE).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE AA BB CC DD FF GG AA Rev.