Installation Guide

ASSEMBLY INSTRUCTIONS
4
Short Machine
Screw
x 2
x 1
BB
CC
Mounting
Bracket
Hardware Used
1. Connect the mounting bracket (CC) to the outlet
box with short machine screws (BB).
BB
Outlet Box
(Not Included)
CC
1
Hardware Used
2. Wire connection guide:
Ground wire: (Bare copper or marked GND)
• For installation in the United States:
Wrap ground wire from outlet box around
ground screw (DD) on mounting bracket (CC),
no less than 2 in. from wire end. Tighten
ground screw (DD). If fixture is supplied with
a ground wire, connect to outlet ground wire
with a wire connector (AA).
• For installation in Canada:
If fixture is supplied with ground wire, wrap
ground wire around ground screw (DD) on
mounting bracket (CC). Tighten ground
Wire Connector
AA
CC
DD
2
AA
x 1