ELAC D E B U T A4 ADD-ON DOLBY ATMO S SPEAKERS MDOLBYENAB LEDSPEAKER S OPERATING I NSTRUCTION llA( T h e li fe o fs o u n d.
Safety Instructions 1. General information • Please read and follow these safety instructions. • Keep them safe for future reference. • Observe all warnings on the speaker and in the manual. Please check the speaker for damage before use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury. CAUTION! Subwoofers and active speakers are heavy. personal injury. Be careful when lifting them to prevent 2.
4. Overload Extreme overload of the device due to very high volume may cause damage to individual components. Theoretically, this kind of overload could cause a fire inside the cabinet (although no actual case is known). Because of the possible danger, you should never leave loudspeakers under extreme overload conditions unattended. 5. Service DANGER! Do not open the cabinet because the components and conductors may carry current! Servicing to be carried out by qualified service personnel only.
Philosophy Thank you for purchasing this ELAC product. When we started in 1926, ELAC has always strived to achieve the very best. This holds true as much today as it did back then . Your new ELAC speakers are built to the highest standards using high-quality components that are carefully constructed to deliver the best-in-class sound quality. They are developed by a passionate group of individuals whose soul purpose is to bring a new dimension of sound quality into your home.
A4 Dolby Atmos Speakers Dolby Atmos Dolby Atmos is the newest technology that brings a third characteristic into the home theater audio environment - height. This revolutionary technology is now being encoded into many of the latest movies and videos to fully deliver an immersive audio experience like no other. Unlike the traditional home theater experience where content is mixed into channels, Dolby Atmos is mixed as audio objects.
ELAC A4 Add-on Speakers A4 DESIGN The ELAC A4 Speakers were designed for the reprodu ction of the newest Dolby Atmos sound technology. They are optimized to match the ELAC Debut speakers in both sound quality and cosmetics but they can also be used with any brand of conventional bookshelf or floorstanding speakers in the market. The A4's construction and performance characteristics follows the strict guidelines set by Dolby in order to deliver to you a true Dolby Atmos experience.
Dolby Atmos Speaker Configurations There are three basic Dolby Atmos configurations when using the A4 add-on speakers. • 5.1.2 Setup- This configuration uses a pair of A4s in addition to your existing 5-channel speakers. The pair of A4s would be added to the front left and right speakers as height channels. • 5.1.4 Setup- This configuration uses two pairs of A4s in addition to your existing 5-channel speakers.
SPECIFICATIONS A4 SPECIFICATIONS ENCLOSURE TYPE CON FIGURATION SEALED 2-WAY CONCENTRIC WOOFER 4" ARAMID FIBER TWEETER 112" POLYMER DOME FREQUENCY RESPONSE CROSSOVER FREQUENCY MAXIMUM INPUT POWER SENSITIVITY NOMINAL IMPEDANCE MAGNETICALLY SHIELDED 180- 20000Hz 2000Hz 80 WATTS 85db @ 2.83vl1m 60HMS NO FINISH BLACK BRUSHED VINYL WI DTH 7.87 INCHES I 200 mm HEIGHT 4.83 INCHES I 113 mm DEPTH 8.75 INCHES I 222 mm WEIGHT (EACH) 5.2LBS I 2.2 kg Manufactured under license from Dolby Laboratories.
ELAC Americas LLC. North America Limited Liability Warranty Passive Speakers (No Built-in Amplifier) ELAC Americas LLC. warrants to the original purchaser that this product be free from defects and or workmanship for a period of 3 (Three) years from the original date of purchase. During this time period, repair or replacement of parts will be free of charge to the original owner (See below limitations). Shipping to and return from the repair center w ill be the responsibility of the original purchaser.
ll A [The Life of sound. ELAC A MERICAS LLC. 1114 5 KNOTT AVE. SUITES E & F CY PRESS, CA.