FAQ
ARCHITECTURAL PVC FAQS
What is PVC?
Each piece of Cellular PVC is made of stable high-density PVC that won't rot, split or
chip, and doesn’t absorb water. PVC has a closed cell nature, so water cannot penetrate
the product and it resists all forms of insect infestations, mold and mildew.
What types of special skills are needed to install PVC products?
None. If you can install wood products, you can easily install PVC products. They can be
nailed, cut and sanded just like wood products.
Are special tools or supplies needed to install PVC products?
Hot-dipped galvanized or stainless-steel nails/screws are recommended for PVC
products. For cutting, we recommend using carbide-tipped blades with as few teeth as
possible and have plenty of support on both sides of your cutting station when trimming
or cutting a product.
What are some general tips about installing PVC products?
Never install products with fasteners only. For best results, use along with PVC compatible adhesive on the back and at all
joints. If nailing product at 40°F or below, predrilling is recommended. For concrete/masonry/brick installation apply
masonry adhesive sealant (following manufacturer’s instructions) to the installation surface first, then laying trim and
securing with masonry fasteners.
Can I clean PVC products?
For normal cleanup regular household cleaners such as Soft Scrub or Spic & Span can be used. Be careful in handling and
keep the material covered to protect it from dirt and debris.
Are PVC products affected by moisture?
No. PVC does not absorb water as it is a closed-cell material. This closed-cell structure will prevent water absorption,
making it perfect to install in bathrooms, kitchens, laundry rooms or outdoors.
Why or how do people use PVC millwork?
PVC is lightweight and easy to install, making it a top selection of both building professionals and consumers for exterior or
interior applications. PVC offers maximum durability and minimal upkeep with a sharp design clarity and high-resolution
quality, with endless custom pattern options. It offers the appearance and workability of wood, yet it is resistant to insects,
weathering, moisture, and mildew. It will not split, rot, or deteriorate.
Where do I use PVC?
Interior or exterior applications up to 180° temperature. It is suitable for ground and masonry contact.
Does PVC expand and contract?
Yes, but allowing it to acclimate to temperature before installing and using our installation method mitigates movement. In
temperatures above 80°F, the board joints should be tight. In temperatures of 40°F to 60°F, leave 1/8 inch of space. For
less than 40°F provide for 3/16 inch between boards.
What type of caulk can I use with PVC?
You can use an acrylic, urethane, or polyurethane caulk with PVC.
What are its best uses for the building industry?
Due to the workability of the material it is easily milled, cut and built to custom specifications. Decorative trims with
detailed designs are quick and easy to produce and with so many variations of sizes, shapes and products, custom PVC
products can save time and money.
Anything special I should know about storing PVC products?
These products can be stored on a flat, level surface either inside or outside, but not in extreme heat or cold. Products
should be stored as it is intended to be installed. Acclimate PVC products before installation up to 10 hours.